Explanation:

• This is a very simple part to hold the Bambulab glue stick to the door of the X1C door.
• I thought there weren't many secure mounting positions for the tools needed.
• other designs used double-sided tape to attach, I think that's a bit poor for a printer of this quality.
• so I've made a simple mount which replaces the the bolts used for the door.
• Keeps the glue exactly where u need it!

To attach:

1. close the door of the printer.
2. remove the two bolts at the bottom hinge location.
3. replace using an M3 bolt.
4. Drop in glue stick

Be careful not to overtighten (I do not know if this poses any risk of breaking the glass so use at your own risk)

I recommend using a M3*12 mm machine bolt available here:

https://www.amazon.co.uk/Metric-Socket-Hexagon-Assortment-Machine/dp/B0C49ZTV4D/ref=sr_1_5?crid=EVFZ4Q9IPD0K&dib=eyJ2IjoiMSJ9.o83tpoh-hwhkwLSd5UW5mIGzUoYsK9VzMN6ruDGSzvIONYzAEla0P9jFL9iXK8q1lhuPC3TAvjhFtf53bQ-tv2AtM1hcs5nJPnwILD0ok_NqDpn-FU-XtSsUETWl6WHkNWyaXcdezE5Ikiz1puQDjuugRQcsrECAWGgel3YtLByOPgL-TlT8bAG3h8YtvK_14G6RGyDMsmZkdnHFWnyUrBgRX7fVHMbhYzAIjg2XIZ0.9TrPtJwlUTVxEutNdZLoXPw3-0qy5JOUpoy05FluGiE&dib_tag=se&keywords=M3&qid=1708817985&sprefix=m3%2Caps%2C397&sr=8-5