WD Bambu Lab X1/X1C/P1S Essentials

WD Bambu Lab X1/X1C/P1S Essentials

Boost
72
186
18

Print Profile(14)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.2mm layer, 5 walls, 25% infill
0.2mm layer, 5 walls, 25% infill
Designer
9 min
1 plate

0.2mm layer, 5 walls, 10% infill
0.2mm layer, 5 walls, 10% infill
Designer
6.9 h
1 plate
5.0(1)

0.2mm layer, 5 walls, 25% infill
0.2mm layer, 5 walls, 25% infill
Designer
12 min
1 plate

0.2mm layer, 5 walls, 10% infill
0.2mm layer, 5 walls, 10% infill
Designer
6.1 h
1 plate
5.0(1)
Click to see more

Open in Bambu Studio
Boost
72
186
18
15
86
32
Released

Description

WD Bambu Lab X1/X1C Essentials to organize your tools, accesories and plates. All the models have slots on the backside to fit neodym magnets with a size of 6x2 mm. I made the Bambu Lab logotypes/fonts separate to minimize wastage, glued them in with a dab of superglue.

 

  • The left tray will fit various tools and containers, the left tray consists of 2 pieces that are glued together. I store a spray can of PTFE to coat the nozzle (I spray on a Q-tip) when printing PETG, different types of glue, a utility knife, a large scraper, a de-burring tool, a small plastic scraper, brass brush, a fine side cutter, a razor blade, a pointed plier and some Q-tips.
  • The right tray will fit 4 plates and a bottle of IPA (No, not the beer). The right tray consists of 2 pieces that are glued together, the larger piece will print best in a printer with bigger build plate but can be printed in a Bambu Lab X1/X1C with the use of supports.
  • The Hepa-Filter Housing uses 4x Hepa-filters made for iRobot Roomba e5/e5154/e6/i7/i7+/i7156/i1/i3/i4/i8.
  • The Poop Chute have through slots on the sides to make it easier to see when it's time to empty it. The inside is smooth to prevent the poop from clogging the chute. ;)

Boost Me (for free)

If you like the model please consider boosting it!

Bill of Materials

Bambu Filaments
A01-D3-1.75-1000-SPLFREE
× 1
A01-K1-1.75-1000-SPLFREE
× 1
Buy Now
Download BOM

Comment & Rating (18)

Please fill in your opinion
(0/5000)

Modified a bit to have a faster print! I would suggest you to change the title or tags as this model fits P1S (at least, the left tray) perfectly. Thank you! ♥️
(Edited)
The designer has replied
1
Reply
That's cool! Didn't want to make any promises so I only mentioned what I knew would work.
0
Reply
Boosted
Haven't printed yet since I have the Bambu lifted feet isolators. Was curious if the extra height would effect the side trays? Love your work, thank you either way.
The designer has replied
1
Reply
I don't think it will, but I guess that depends on how high the feet isolators are. The magnets are placed high up on the trays to allow for feet isolators. If the feet isolators are around 10 mm you should be fine!
1
Reply
Boosted
Replying to @Westersund :
The magnets don't seem to be strong enough to hold up the HEPA filter add on for me. Did you run into this when designing? Any tips? Love your work.
0
Reply
Replying to @TyWillee :
Did you use the neodym magnets in the description? You need neodym magnets as "regular" magnets aren't strong enough. My Hepa-filter holder have stayed in place for a year now.
1
Reply
Boosted
The description alone, is incredibly helpful for a beginner like myself.
The designer has replied
2
Reply
Boosted
Can you get everything in one file? even if just the stls
0
Reply
Happy it made a difference, I'll see what I can do adding everything into 1 .3mf file.
1
Reply
Any chance anyone could modify this to raise it so that it would better fit when the Anti-Vibration Feet are installed?
The designer has replied
0
Reply
It should work even with the anti-vibration feet.
0
Reply
Replying to @Westersund :
it does, but esthetically it stays below the printer level...
0
Reply
Boosted
TY!
The designer has replied
1
Reply
You're welcome!
0
Reply
Print Profile
0.2mm layer, 5 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 5 walls, 10% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.