SPOOL ADAPTER V.3.0 AMS BAMBU LAB
Copyright Claim
SPOOL ADAPTER V.3.0 AMS BAMBU LAB
Boost
179
358
101
Print Profile(5)
0.2mm layer, 2 walls, 20% infill
Designer
55 min
1 plate
Basic PLA Print - 0.2mm layer, 2 walls, 20% infill
54 min
1 plate
Basic PETG Print - 0.2mm layer, 2 walls, 20% infill
1 h
1 plate
Stronger Version with Bamboo-Support-Material: 0.2mm layer, 3 walls, 20% infill 3D Honeycomb
1.2 h
1 plate
Click to see more
Open in Bambu Studio
Boost
179
358
101
8
598
569
Released
Description
Update V.3.0
Released new upgrade to load any spool
Good print
Comment & Rating (101)
All
Not good for 250gr spools.
The designer has replied
0
Reply
su 2k di download delle 3 versioni e’ sempre andato bene..che problemi riscontri??
0
Reply
Replying to @Gr3dstampaidee
ho evitato il punteggio infatti. tocca sull’altro lato del tuo extender.
0
Reply
Print Profile
Basic PETG Print - 0.2mm layer, 2 walls, 20% infill
👍
1
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
I had 3 failed prints where the teeth either shifted or got bumped during printing and caused the entire row to spaghettify or rip off the plate. To fix this I added a new profile where the model is split in half and layed on its side requiring no supports and making the print easier.
My only other issue is that some mini-spools will not work if the gap between the sides isn't wide enough so I will still have to rely on other adapters for those spools and those that do shift around a lot.
1
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
nice adapter! thanks! I used on a .5kg spool.
1
Reply
the idea of this adaptor is very good.
unfortunately it does not fit with my 200g spools…
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Two bridges broke off during printing. I try it in PLA (green) and PETG (blue).
The version with support, on the other hand, worked immediately.
(Edited)
0
Reply
Printed V3.0 in blue translucent PETG but broke trying to remove from build plate. Then printed the split version in ABS.
That works so much better and the one I would suggest. Strength is way better and has more slots for different size spools. Weight supported nicely on center console between spools. Well done
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
I still can’t print with this on but the adapter print is really nice thank you
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
perfect fit. thanks
0
Reply
Print Profile
Stronger Version with Bamboo-Support-Material: 0.2mm layer, 3 walls, 20% infill 3D Honeycomb
I loved versions 1 & 2 I think this one will finally let me use a few spools that were too small for even V2. thank you so much
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld