I needed a storage box for the magnets that i ordered as they came in an aluminum box which is not so practical for magnets.
You will need 4 pcs 6x3mm magnets for this project, 2 magnets in the bottom part and 2 magnets in the lid. The tolarances for this model are modeled to work with my Bambu X1C it might differ to your printer.
The box holds a maximum 50 pcs of 6x3 mm magnets.
Print Settings:
0.2 mm Layer Height.
0.4 mm Nozzle.
No Supports.
No Brim.
Variable Layer height set to 0.10 in Bambu Studio.
I used PLA but you should be able to use any filament.
Printed on Bambu Lab X1C.