A1 Mini Nozzle Wiper For Bambu Lab P1P/P1S/X1C
Remixed by
Copyright Claim
A1 Mini Nozzle Wiper For Bambu Lab P1P/P1S/X1C
Remixed by
Boost
32
65
12
Print Profile(3)
PETG, 0.93 flow, 0.2mm layer, 3 walls, 10% infill
Designer
12 min
1 plate
ABS, 0.2mm layer, 3 walls, 10% infill
Designer
10 min
1 plate
0.12mm layer, 2 walls, 15% infill
57 min
1 plate
Open in Bambu Studio
Boost
32
65
12
0
103
43
Released
Description
a (less elegant) remix of a nozzle wiper addon from Alkerion_426716.
Updated to fix an obvious issue that I somehow missed on initial upload.
This wiper is in a translucent PETG and looks sort of unappealing because I've pulled this particular wiper off of a few others and there's glue residue
Comment & Rating (12)
All
Print Profile
0.12mm layer, 2 walls, 15% infill
Other Issues:This doesn't work at all due to the tail of the adapter being too large. In theory it's great but as soon as you level the bed, it pushes the adapter up. The gap between the bed and where the adapter is very small and the incorrect shape.
0
Reply
my apologies for the obvious oversight. I've updated it with a slimmer version that doesn't have any collision issues. I'm replying to all the comments in hopes it actually notifies people, as I would have fixed it right away had it done so for me.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
Printed great
Other Issues:It gets knocked of by the build plate every time it it rises up
0
Reply
my apologies for the obvious oversight. I've updated it with a slimmer version that doesn't have any collision issues. I'm replying to all the comments in hopes it actually notifies people, as I would have fixed it right away had it done so for me.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
gefällt nicht
0
Reply
my apologies for the obvious oversight. I've updated it with a slimmer version that doesn't have any collision issues. I'm replying to all the comments in hopes it actually notifies people, as I would have fixed it right away had it done so for me.
Ich entschuldige mich für das offensichtliche Versehen. Ich habe es mit einer schlankeren Version aktualisiert, die keine Kollisionsprobleme hat. Ich antworte auf alle Kommentare in der Hoffnung, dass dadurch die Leute tatsächlich benachrichtigt werden, da ich das Problem sofort behoben hätte, wenn es das für mich erledigt hätte.
0
Reply
Print Profile
PETG, 0.93 flow, 0.2mm layer, 3 walls, 10% infill
updated version fits and allows the original whiper to stay in place
(Edited)0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
Other Issues:Build plate knocks this off. Prints well but needs refining
0
Reply
my apologies for the obvious oversight. I've updated it with a slimmer version that doesn't have any collision issues. I'm replying to all the comments in hopes it actually notifies people, as I would have fixed it right away had it done so for me.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
Other Issues
0
Reply
my apologies for the obvious oversight. I've updated it with a slimmer version that doesn't have any collision issues. I'm replying to all the comments in hopes it actually notifies people, as I would have fixed it right away had it done so for me.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
0
Reply
No more
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld