Print at 100% infill with a layer height of 0.08mm with a base layer of 0.12mm
Filaments Used:
PLA Smart RE Red Transmission Distance: 5
PLA Smart RE Yellow Transmission Distance: 5
PLA Smartfil Black Transmission Distance: 1.2
PLA Smartfil White Transmission Distance: 14
Swap Instructions:
Start with Red
At layer #9 (0.76mm) swap to Yellow
At layer #14 (1.16mm) swap to Black
At layer #19 (1.56mm) swap to White for the rest.
For the stand I used my design Easel for HueForge or Photos (Print in place)