I do my hueforge prints fairly thick.. so they take quite a while.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Matte Dark Brown Transmission Distance: 1.9
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #13 (1.12mm) swap to Dark Brown
At layer #20 (1.68mm) swap to Latte Brown
At layer #25 (2.08mm) swap to Ivory White for the rest.