This is a Remix of my USB cable organizer meant to be wall mounted. 

This version is designed to support both normal sized and also thinner USB cables (in different slots), with holes that are 4mm wide and some that are 5mm wide.  Similar to the original models, there are several sizes and ways to mount them.

• The 3 slot version has two slots for thin cables and one for normal USB cables.
• The 4 slot version has two slots for thin cables and two for normal USB cables.
• If you want the 6 slot version with two slots for thin cables, you can find that one here.

There are 3 versions which have different wall mounting options:

• The first has “PLAIN” in the filename, and can be mounted with double sided tape.
• The 2nd design has “CM” in the filename, for use with 3M command strips, it has a small cut out on the side to help with removing the command strip.
• The final has “SCREWS” in the filename, and uses screws. The screw holes are designed for a #8 screw. 

I printed it in the tall orientation which requires minimal supports. Seems to work fine for the cables I have on hand.

If you need a version to support thinner, or a mix of cables, check these out:

• For thinner (4mm) cables - there is 3, 5 or 6 place holder here.
• For a mix of regular (5mm) and thin (4mm) cables - there is a 3, 5 or 6 place holder here.

The 3MF profile is included.

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here or on Printables, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!