Bambu Lab X1 P1P P1S Anti Vibration Feet TPU Bambulab by print.tech3d

print.tech3d

3D Printer>3D Printer Accessories

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

4x feet 0.2mm layer, 2 walls, 15% infill

Designer

2.8 h

1 plate

4.6(67)

1x foot 0.2mm layer, 2 walls, 15% infill

Designer

49 min

1 plate

4.3(36)

0.16mm layer, 2 walls, 15% infill

2.9 h

1 plate

4.8(10)

0.2mm layer, 2 walls, 15% infill, for printing with A1 mini

47 min

1 plate

Open in Bambu Studio

Boost

189

314

118

1 k

791

Released

Description

These are anti-vibration feet for the Bambu Lab X1/P1P, inspired by the original ones that can be bought in the Bambu Lab shop.

They are printed from TPU and work very well.

bambulab upgrade

feet

Comment & Rating (118)

@Hopeslice

Print Profile

1x foot 0.2mm layer, 2 walls, 15% infill

Great print. Is there somewhere I can see the specific print settings from Bambu Studio? I want to see why this might be a success compared to my other TPU prints. I used Bambu Labs 95A TPU-HF but kept the filament selection as regular 95A on the app for this print. maybe that's why it's better (slower). Previous parts of mine had delamination between the initial solid layers and the 1st infill layers when I flexed the finished part. Please share🙂

(Edited)

@Hopeslice

? are these generic settings?

@vkx8nssnjc

Print Profile

1x foot 0.2mm layer, 2 walls, 15% infill

utiliser ce profil avec TPU bleu de Overture. fonctionne très bien

@user_1127769800

Print Profile

4x feet 0.2mm layer, 2 walls, 15% infill

great print. thanks for uploading

@bymafilip

Print Profile

4x feet 0.2mm layer, 2 walls, 15% infill

work well just had black oozing on the print (probably too hot)

@rikaro

Boosted

Print Profile

4x feet 0.2mm layer, 2 walls, 15% infill

printed in black tpu. no problem at all.

@zakolix

Print Profile

4x feet 0.2mm layer, 2 walls, 15% infill

bambu TPU 95A HF

@kk20100kk

Print Profile

1x foot 0.2mm layer, 2 walls, 15% infill

Kind of hard to print but it does the job as intended. I would not have done it better. Thanks

@ezmike

Print Profile

4x feet 0.2mm layer, 2 walls, 15% infill

printed well using matterhackers TPU

@sakaboy

Printed with Shore 95A TPU in X1C after 12 hours drying.. Result so good..

@mrvn_bhmnn

Print Profile

4x feet 0.2mm layer, 2 walls, 15% infill

Prints perfectly without any supports with TPU on my P1P.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.