Spring Mandala Wall or Table Decor
Can be adjusted on X and Y to decrease size (stick with the z being .20 to .25)
Print Time abt 3 hrs 15 min
P1P/ Bambu Basic
Aux fan is OFF (if using one)
Settings
First Layer .2mm
Other layers .16mm
Classic walls
2 wall loops
5 top shell
5 bottom shell
20% Gyroid infill
Prime tower enabled
Brim/Bed Adhesion: None Needed
Flushing set for .75 (you will need to adjust this for your filaments and machine type)