Grainne_Ni_Mhaille-LadyBawlsArt

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

Heart Shaped Candy Bowl And/or Cake Plate Stand

0.2mm layer, 2 walls, 20% infill

Naughty, Nice, An attempt was made (Just saying)

Santa "You should See The Size..."

0.16mm layer, 2 walls, 20% infill

Christmas Bell Earrings

0.16mm layer, 2 walls, 15% infill

Let's Have a Ball (Christmas Style)

0.16mm layer, 2 walls, 10% infill

Sugar Skull Earrings

0.16mm layer, 2 walls, 25% infill

Dolphin Earrings - Two Designs

Finding "Gill"

0.16mm layer, 3 walls, 50% infill

Gekko - Simple Dangle earrings

D & P - The Litho

Prayers to the Goddess

Poseidon - Master of the sea Lithophane

Sea Siren Lithophane

0.16mm layer, 2 walls, 30% infill

Leafy casual earring design

Boho Chic Earrings

0.18mm layer, 2 walls, 15% infill

Crescent Moon Layered Mandala Wall Art

0.2mm layer, 2 walls, 12% infill

Flutterby Butterfly 2D Art

0.18mm layer, 2 walls, 12% infill

Chinese Dragon Wall Art

0.08mm layer, 2 walls, 15% infill

Spring Mandala

0.18mm layer, 2 walls, 20% infill

Dragon Wall Art , Decor Or Cake Topper

Saber3D

Articulated Stone Dragon by Saber3D

Stone Dragon (100% Size, 1Color, No Brim)

I really like the file...i did increase the "others" layer speed and decreased the "initial" layer speeds a little. I exprimented at 100% & at 90% and may even step down to 80%. it is a dependable Dragon file and while i tend to do only 3 walls and usually have no issues, i think upping the walls to 3 on a silk filament make would make these super realiable prints  with that material as well....Great job

Valeria Momo & Mattia

Cute Flexi Pets Giraffe (Keychain Friendly)

0.20mm layer, 2 walls, 15% infill

SUPER Cute- i went in and added more spots on mine by painting  in Bambu studio

k2thestank

AMS Feeder PTFE Adapters

figured out had to finally get them popped on but my PTFE collar connector looks different then the one in the pic of the finished file by designer

Praus8577

Birthday Crown

i made this MUCH larger for an adult with a big ol noggin. we did heat it with a dryer after to shape it to fit the head rather than sit on top....now were are gonna bling it out with some gemstones

Daann_ii

Articulated Jumping Spider

40% scaling, 0.16mm layer, no support

these turned out great i even printed up to 175%...i have a hoard to give the neighbor's children to play with...LOL

CubicMakers|立方造物

Assemble succulents|拼装多肉

I had so much fun making this print my own and adding colors and stuff here and there-totally customizable BUT i would not recommend doing any of the pieces used for joining  or the stems and stuff in Matte. i had two different colors of matte from two different companies and those prints broke while attempting to assemble. The regular PLA worked like a charm and the screws and everything fit together just as it should

waltersworld3d

Bricks Captain Marvel

Brick Deadpool

iNkosi3D

Mushroom

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

Sh^ts'N'Giggles3d

She-Wee - Portable potty for woman

0.2mm layer, 6 walls, 25% infill

printed well - i changed the tree support to SLIM and then increased the support threshold angle to 43 and it printed like a dream (and the supports removed with minimum effort

Bricks Ozzy Osbourne

Awesome as always....i do struggle with a tighter fit. my allowances must be lower or something cause i have to heat up or sand down to get the clearance to work enough so i can beat some pieces together.....i am just baffled at how to dial in my print settings from one model to the next...i also increase these to 120% which probably doesn't help the clearances.....but those issues are all on me, not this creator. The model itself is AWESOME

Balzo98

Easy to print duck

2 Color, 0.2mm layer, 2 walls, 15% infill

i painted mine in studio.....cute lil duck...i also increased the scale for each to 125% and i can see these looking better at 200%

Leeroi

The Dragon Years - Hueforge

0.08mm layer, 2 walls, 100% infill

casper7mmx

Use the Force Sign

camillabertrand

Hueforge - Dragon

rschrader

Supportless Ghostship Benchy

0.2mm layer, 2 walls, 25% infill

jkmayfield26

Benchy who?

Love this little guy-i painted mine in studio

Fastfrosch

HUEFORGE Pirate ship

I3ddruckmarc

Bambu Lab lithophane frame - less support

0.2mm layer, 5 walls, 50% infill

I really like this version of the frame and it worked perfectly with the bamboo LED light block as well as the light filter that slides in between and then ultimately the lithophane

Nates Print Shop

Cousin Eddie's Christmas Vacation Lithophane

0.1mm layer, 2 walls, 100% infill

these models turned out great I love this. and the colors really work very well with this particular image

Shhrooooms-LOL (an trip in AI)

Inspired By Legos Mega Santa