Vibration Feet V2 bambulab by rskrazvan

rskrazvan

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

51 min

1 plate

Open in Bambu Studio

Boost

Released

Description

This is an updated model that helps with the overhang, i adjusted for an 45* angle.

I recommend printing it in TPU 15-20% infill and if you have PEI sheet, put some glue/hairspray/ or in the freezer for a few minutes. it helps to remove the print more easily

Comment & Rating (2)

@user_3647671958

I printed them with clear TPU for my X1C. No matter how much I tried, the top part won't sit inside the feet opening. Now the printer is prompted on top of them; afraid that it will fall. Thought they were designed for X1C. They are too big to fit inside.

The designer has replied

@rskrazvan

it should fit both p1 and x1c, you can check the v1, the only difference between v2 and v1 is the inside angle. Here is the link for v1 https://makerworld.com/en/models/145202#profileId-160341

No more