Purge Chute Cover

Alexis_

3D Printer>3D Printer Accessories

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

Purge_Chute_Cover

Designer

31 min

1 plate

4.7(111)

Without Handle 0.2mm layer, 3 walls, 30% infill

16 min

1 plate

4.6(59)

LOGO addet, 0.2mm layer, 2 walls, 15% infill

29 min

1 plate

4.6(14)

Arachne 0.2mm layer, 3 walls, 25% infill

20 min

1 plate

4.6(7)

Click to see more

Open in Bambu Studio

Boost

278

688

230

1.5 k

1 k

Released

Description

For X1 P1P P1S

Print in ABS preferably.

_____________________________________________________________________________________________________________________________

If you want to support me you can join a patreon membership: patreon.com/Alexis_915

Check out more of my designs below and on my profile: makerworld.com/@Alexis_

Comment & Rating (230)

@makerdog

Great fit but I had to remove the completely unnecessary handle because you can remove it with pushing it with your fingers from the back. So I was able to print it without supports. thank you nevertheless for the great design. I uploaded my print profile without the handle to print without support

(Edited)

The designer has replied

@Alexis_

When making my prototypes I tested without a button, this made the plate difficult to insert correctly and printing the clips horizontally made them more fragile. My goal was above all that the plate would not be removed during printing and that could ruin it. Thanks for your feedback.

@makerdog

Replying to @Alexis_ :

I printed it with bambu PETG CF and the clips are very sturdy but you could design them even thicker if you would want because there is plenty of room behind it. I also added 2mm foam tape for insulation behind it

@Nobody28

Print Profile

Purge_Chute_Cover

Hier mit Logo ... https://makerworld.com/en/models/180265#profileId-206840

(Edited)

@Nobody28

Nach einem Hinweis, habe ich die Datei neu hochgeladen. Das Logo Stand Kopf. Sorry, an alle, die es schon gedruckt haben.

@gpxsin0324

Print Profile

0.2mm layer, 2 walls, 15% infill

還行

@Albi27

Print Profile

Purge_Chute_Cover

removing the supports its a bit tricky, but ok

The designer has replied

@Alexis_

yes the supports require pliers to remove them, I forgot to specify that. Thanks for your feedback

@Makerneer

Print Profile

Without Handle 0.2mm layer, 3 walls, 30% infill

Excellent print, no more filament poops sneaking past here and into the guts of the 3D printer

@Madddogg100

Print Profile

Without Handle 0.2mm layer, 3 walls, 30% infill

Went for the no handle version. Perfect fit.

@Strube2000

Print Profile

Purge_Chute_Cover

Nice print, no problems

@PCHuDSoN

Print Profile

Purge_Chute_Cover

had to have a couple of goes and maybe strong supports might be the way to go but got the profile to work

@jakejackson036

Boosted

Print Profile

Purge_Chute_Cover

printed in pla but has had no issues whatsoever

@Mr.Quen

Print Profile

Purge_Chute_Cover

Decided to go for the version without handle and it fits great. Thanks for the nice model :)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.