Bambu Lab X1C and P1S - Top Glass Support by Jorge Rui

Jorge Rui

Tools>Organizers

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.24mm layer, 2 walls, 15% infill

Designer

5.9 h

3 plates

4.8(24)

0.24mm layer, 2 walls, 15% infill

Designer

5.5 h

3 plates

3.5(2)

0.24mm layer, 2 walls, 15% infill

Designer

5.5 h

3 plates

Boost

215

340

393

287

Released

Description

Introduction

This holder allows you to store the glass cover of the printer in a safe and stable way.

With an inclination of 6º to the vertical plane, the glass is stabilized by its own mass.

Other options

There is a version of this, that can support up to 8 build plates, plus the top cover glass.

Note

I am not responsible for any material or physical damage that may arise from the use of this support.

Change log:

(25-09-2023) - Added a version with two spacers, this was asked for a user, and some of you may want this to, so here it is. (Top_Glass_Support_v2.3mf)

Support the designer:

This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to buymeacoffee or paypal, or even better, join “My Club” here in printables.com, that will be greatly appreciated.

Comment & Rating (37)

@Yaboi

Hello sir, I am seeing something strange that nobody else seems to have reported. The spacer is a very loose fit with the two stand elements. I took a quick look in Fusion360 and it does appear that the spacer dovetail joint is indeed smaller than the opening, but perhaps that was your intent and I am missing something. Could you please check that the dimensions in the file you have uploaded are what you expect them to be? Thanks

The designer has replied

@JorgeRui

🤨 I will. Check on that. Thanks for let me know

@pietrorizzato

Print Profile

0.24mm layer, 2 walls, 15% infill

Prints very well! great design can’t wait to print the other parts as well

The designer has replied

@JorgeRui

Thanks, and thanks for posting the makes and the great evaluation !

@Kardes.Design

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

Perfection!

The designer has replied

@JorgeRui

thanks ! you can remove the spacer now ;)

@Emiliano_FFF

Print Profile

0.24mm layer, 2 walls, 15% infill

Useful and well done project. I noticed that the rods are higher than the seat, this can be remedied by making a 4mm cut on bamboo.

@Kardes.Design

Boosted

Perfect print! I love the TPU inserts. They slide in perfecty and are very secure.

@al0yyy

Print Profile

0.24mm layer, 2 walls, 15% infill

works perfectly to sit between my printer and dryer

@robergeincurabl

Love this design!

The designer has replied

@JorgeRui

thanks, I’m glad you like it !

@stefblo

Impossible to open in Prusaslicer or Cura. It is only for Bambustudio even raw model files. But thx

The designer has replied

@JorgeRui

yes it is only compatible with bambu studio and orca slicer. This is a product for bambu labs, so I start from the principle that user only use the software compatible with their printers…

@HephaestusNovo

Print Profile

0.24mm layer, 2 walls, 15% infill

I wish I noticed that there was a version that also holds print bed plates.

@daSash82

Print Profile

0.24mm layer, 2 walls, 15% infill

hat wunderbar funktioniert. Die TPU Einsätze haben sich perfekt gepasst!

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Glass Door Panel Gap Cover for P1S & X1C

br1acc

Bambu G Duct

Gulsifer

169

277

2-Step Top Glass Riser (X1C+P1S)

ThreeD-Michael

P1S/P1P Fan Cover

Barika

168