Different models that we use for testing filament.
Turn off flow calibration and use Bambu Lab presets according to wiki page. Set filament max volumetric speed and use generic profile.
the flat model with different thicknes is good for customer display since the thinnest section show how transparent some filament is while having a hole for collecting several test prints.
Advanced model with different geometric is something designed inhouse with different sections like 45 degree, bridge and print in place rotating. Good model to see if the profile is good.
Layer height: 0.2mm
Wall Loops: 2
Top shell layers: 4
Bottom shell layers: 3
Infill: 15%