FREDDY HUEFORGE PRINT by TJSlayer

TJSlayer

Generative 3D Model>Hueforge & Lithophane

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 2 walls, 100% infill

Designer

5.2 h

1 plate

0.08mm layer, 2 walls, 100% infill

Designer

6.7 h

1 plate

Open in Bambu Studio

Boost

Released

Description

PRINTED THIS FOR A FRIEND

After seeing some nice artwork someone posted on Facebook from Samhain1992
I THOUGHT WOULD WORK INTO A NICE HUEFORGE PRINT.

USED THE FOLLOWING SETTINGS… can be done with or without AMS

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Tough Vermilion Red
PLA BambuLab Basic Yellow
PLA BambuLab Basic White

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Vermilion Red
At layer #20 (1.68mm) swap to Yellow
At layer #25 (2.08mm) swap to White for the rest.

freddy

nightmare on elm street

Comment & Rating (1)

@TJSlayer

For the longer print the swaps are at different times as there are more layers...wasn't sure how to add to that profile. Layer 8 sway to red, then 19 for yellow and 23 for white. The rest of the settings are the same.

(Edited)

No more