Pegasus 3D

cover

IMG_9524.jpg

IMG_9525.jpg

IMG_9522.jpg

GetAttachmentThumbnail.jpg

220MM TALL, 400G

plate_1.png

180MM TALL, 330G

plate_2.png

2025-08-17_d6f0afaf709e78.jpg

Two sizes, 400g and 335g, included. Prints solid for best light diffusion. Printed mine out of PETG, but PLA should work ok with this profile too, I didn&#39;t monkey much with speed settings or anything.

PETG | Gray Borders/AMS | 0.2mm layer height

335g, 179mm tall

Scaled to fit A1 Mini. Takes 335g of filament. Prints solid for best light diffusion. Printed mine out of PETG, but PLA should work ok with this profile too, I didn&#39;t monkey much with speed settings or anything.

A1 Mini | PETG | Gray Borders/AMS | 0.2mm layer

1 color 

colored borders

NO AMS REQUIRED. Scaled to fit A1 Mini. Takes 335g of filament. Prints solid for best light diffusion. Printed mine out of PETG, but PLA should work ok with this profile too, I didn&#39;t monkey much with speed settings or anything.&nbsp;If printing the multi-color option, use plate 2. Start and finish with your border options. It&#39;ll pause twice to allow you to change the filament.  To manually change the filament: <ol><li>use the cut filament lever on the side of your A1 toolhead. </li><li>Hold the extruder spring open with the lever to the left of the filament path and pull the filament out. </li><li>Push the new filament in as far as it&#39;ll go (while still holding that lever open).</li><li>Release the extruder gear lever. Gently pull on your filament to make sure it&#39;s in there solidly. </li><li>Resume the print and stick around to make sure it starts up as it should.</li><li>Cheers!</li></ol>

A1 Mini | PETG | NO AMS | 0.2mm layer

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Think my design is lit? Thanks.  Light up my day with a boost!</boostcontent></boostme>Light up your space with a modern twist! This hex-pattern lampshade screws right onto a standard lamp socket, swapping out your old shade for a sleek, geometric look. Print in translucent filament to let the glow shine through — because even your nightstand deserves good design.&nbsp;Please double check the dimensions before printing to ensure it&#39;ll fit on your lamp. Enjoy!

Hex Pattern Lampshade

ASIA

Print Profile(3)

Description

Comment & Rating (0)

License

Related Models