Bambu Scraper

apex3D

3D Printer>3D Printer Accessories

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

Profile 0.2mm

Designer

56 min

1 plate

4.9(494)

(improved strength and quality) 0.16mm layer, 3 walls, 10% infill

59 min

1 plate

4.9(311)

without magnet pocket (improved strength and quality)

1 h

1 plate

4.9(110)

Mirrored Scraper - for mirrored blades (Profile 0.2mm)

1 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

937

1865

1026

580

6 k

4.9 k

Released

Description

After getting tired that all plastic scrapers are done after one use I finally decided to use metal scraper that came with the machine. however I did not particularly like the design of the original scraper BambuLab provides on microSD card/website - see model here.

I decided to model my own which was inspired by Wera tools I love. It is nice design which fits really well into your hand.

This version is modified version of my original design which you can find here.

UPDATE (2024-08-27)

As requested by some I made a gridfinity stand that fits my design…

UPDATE (2024-03-08)

As requested by some I made a stand that fits my design…

FEATURES

Cool Wera handle design
Honeycomb pattern + BambyLab logo
Easy to print an assemble (no more confusing where does the part go from the original model…)
No supports, flawless print
Hole so you can hang it if you wish
Dedicated space for the magnet

WHAT DO YOU NEED?

Well nothing! You should have everything already when you purchased your printer.

19g of material (PLA is just fine)
2x screws for scraper
Blade
1x magnet (optional)

HOW TO USE IT?

As the original model also this one can be used from both side, but it shouldn't! I was thinking about poko yoke solution, but that would hinder its functionally so here is an example how to use it. On top of that I added arrow to the part where fingers rest to make it more obvious.

I would not recommend using this scraper of textured plates and would be very very cautions on smooth PEI to. I think it is ideal for cool plate, but could not find any information from BambuLab regarding the use case, so that is only my opinion…

Comment & Rating (1026)

@user_1390211511

The scraper is very nice. Unfortunately, the new version has the blade upside down. Half the images in your post show the blade correctly installed with the beveled edge facing up (like the first picture) but the half show it incorrectly installed with the beveled edge facing down (like the last picture). With the blade upside down it is so much easier to gouge the plate. Not sure about the other versions as I just printed the one.

The designer has replied

@apex3D

blade can be installed both ways. just read description how to use it…

@threatfrequency

Replying to @apex3D :

I think what they mean is that the pins that are offset to hold the blade put the bevel of the included blade facing down. Maybe that's intended?

(Edited)

@user_3562757791

Replying to @threatfrequency :

If it's intended, it's wrong. I've just printed it and the blade being upside down definitely makes it harder to safely use it. Can also check the Bambu Lab version and that one has the blade oriented the other way - the little angled surface needs to point up away from the plate, not slide against it. This way it pulls the printed material off the plate safely and easily.

@LoudBobAcorn

Boosted

Print Profile

(improved strength and quality) 0.16mm layer, 3 walls, 10% infill

Great scraper. what else can i say?

The designer has replied

@redx

Boosted

nice hands😀

@LoudBobAcorn

Boosted

Replying to @redx :

uh.... thanks ig?

@redx

Boosted

Replying to @LoudBobAcorn :

😂🤷🏻

@redx

Boosted

Print Profile

Profile 0.2mm

Looks so good love it.

The designer has replied

@apex3D

nice blue, what filament is that?

@redx

Boosted

Replying to @apex3D :

thanks, thats Polymaker PolyTerra Ice i recommend you go down with the speed with this one its also says on the packaging max 70mm/s

@redx

Boosted

Replying to @apex3D :

Yo I just realized you can use the preset from bambulab and it will print clean so you don't even need to do adjustments

@fonomoxi

Boosted

Print Profile

(improved strength and quality) 0.16mm layer, 3 walls, 10% infill

🇮🇹Very beautiful, I customized it to my taste and I really liked the result default presets on A1 Mini

(Edited)

The designer has replied

@redx

Boosted

nicee

@user_3496198418

Print Profile

(improved strength and quality) 0.16mm layer, 3 walls, 10% infill

Perfectly fitting the original blade

The designer has replied

@redx

Boosted

yessir

@PrintingPepe

Boosted

Print Profile

(improved strength and quality) 0.16mm layer, 3 walls, 10% infill

My first print! love the quality

The designer has replied

@redx

Boosted

nice

@Zip3D

Print Profile

(improved strength and quality) 0.16mm layer, 3 walls, 10% infill

print came out perfect! Love it :)

The designer has replied

@redx

Boosted

nice

@Koky3d

the best scraper

The designer has replied

@apex3D

nice colors there!

@z0om

looks and feels great, thanks!

The designer has replied

@apex3D

glad you like it

@df2qf8hy7t

Print Profile

Profile 0.2mm

came out great!

The designer has replied

@apex3D

thanks

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.