This little hook allows this Scraper made by apex3D to be mounted to the front glass of the Bambu lab X1C,

Instructions:

1. Remove Front top glass screw using a 2.5mm Allen Key

2. Place an M3*12 Counter sunk bolt through the part and into the glass, be careful not to overtighten.

Hang Scraper in an obvious place you won't forget!!

Parts Used:

https://www.amazon.co.uk/Hexagon-Countersunk-Washers-Assortment-Fastener/dp/B09BJKWLBG/ref=sr_1_27?crid=1QYH06GO6TF47&keywords=m3+countersunk+screws&qid=1708294193&sprefix=m3+c%2Caps%2C602&sr=8-27

Scraper Model from apex3D

https://makerworld.com/en/models/169754#profileId-186413