Fidget Toy | TPU Magnetic Dice

🧲🎲A highly tactile, endlessly playable fidget toy that mixes TPU squish, magnetic pull, and satisfying geometry — all in a clean, support-free print. The grip of TPU and weight of the magnets will leave you surprised at how satisfying these dice are to hold! 

How do the magnets get in the dice? The magic happens mid-print: each die is designed for you to drop in magnets during an automatic layer pause. After you've pressed them in, simply resume the print and you're good to go. 

Highlights

• Designed for TPU – flexible, durable, and fun to squeeze.
• Can print with PLA/PETG for a unique magnetic dice fidget — minus the flex.
• Two options for magnet size 12mm or 15mm diameter:
  • 15mm diameter print profile: use 3 - 15x2mm or 2 - 15x3mm 
  • 12mm diameter print profile: use 3 - 12x2mm or 2 - 12x3mm
  • 🆕10mm diameter print profile: use 3 - 10x2mm or 2 - 10x3mm
  • 🆕8mm diameter print profile: use 3 - 8x2mm or 2 - 8x3mm
  • Print will automatically pause when you should insert the magnets.
• Filament friendly - each die only takes a few grams of material, print 3 for under 10g.
• Great for desktops, gifts, or just something fun to fiddle with!

 Printing Notes

• Print with TPU 95a HF, or go with 90a or 85a for even more squish.
• I recommend printing one die at at time for the best quality.
• If using a hardened steel nozzle, adding a dab of CA glue when inserting magnets will ensure they don't lift up on resume.

• Keep an eye 👁️ on the first layer after resuming printing in case the nozzle wipe isn't clean. You should be able to quick grab any stringing with a needle nose pliers to prevent surface defects.

   

Related Models