Self-watering planter/flower pot
Boost
62
122
6
Print Profile(1)
Self-watering planter 0.2mm layer, 4 walls, 15% infill
Designer
10.1 h
2 plates
Open in Bambu Studio
Boost
62
122
6
2
131
60
Released
Description
Geometric self-watering planter with quick water check and refill. Designed to ensure perfect irrigation of the plant root system.
For printing, I recommend using the attached files in STEP format. To print the "planter_head" model, you need to set the supports.
Printing recommendations:
- Use PETg, ABS or ASA, do not use PLA.
- set a minimum of 4 walls and 10 - 15% infill to ensure the water permeability of the pot
Enjoy! I will be glad if you share your colour combinations!
You can also download the locker in the photos here:
https://makerworld.com/en/models/147580#profileId-176565
Comment & Rating (6)
All
Boosted
Print Profile
Self-watering planter 0.2mm layer, 4 walls, 15% infill
Good design. I have printed just the edge of the cover :)
The designer has replied
1
Reply
great! enjoy:)
0
Reply
Boosted
Print Profile
Self-watering planter 0.2mm layer, 4 walls, 15% infill
First half came out great.
0
Reply
Print Profile
Self-watering planter 0.2mm layer, 4 walls, 15% infill
good design, watertight, printed it wice, both with pla and petg, got both times distortions on the outer sides.
0
Reply
Print Profile
Self-watering planter 0.2mm layer, 4 walls, 15% infill
1
Reply
Print Profile
Self-watering planter 0.2mm layer, 4 walls, 15% infill
1
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld