This chameleon looks like it's popping out of the wall tiles - however, this print is only 2mm thick, and the illusion is the result of the amazing colour blending from the different filament colours!

The 3MF will have all necessary filament swaps already coded in if you're using Bambu studio. If you're not, you can download the STL in the attachments, and follow the following instructions:

Print Instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA Siddament Purple Sparkle Transmission Distance: 5
• PLA Sunlu Lilac Transmission Distance: 6.6
• PLA Kingroon White Transmission Distance: 8

Swap Instructions:

• Start with Black
• At layer #11 (1mm) swap to Purple
• At layer #13 (1.16mm) swap to Lilac
• At layer #19 (1.64mm) swap to White for the rest.

_______________________________________

If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!

_______________________________________