I love the Babo DUO Riser its perfect but the LED almost make me blind

so i made a LED diffuser for the BABO DUO riser.

INSTRUCTIONS:

just replace the old seals with the diffusers.

they will fit inside where the seals used to be.

u have to press a lil bit its a tight fit the kind of click inside.

TIPPS/ RECOMMENDATIONS:

i highly recommend using cable chain clips and a printhead ptfe guide when using the diffusers!

the cable chain always hits the babo riser and kind of snaps back with force creating a loud clicking noise…

if the diffusers are mounted without clips and cable printhead ptfe guide, the printhead could knock them down…

cable chain clips:
https://makerworld.com/en/models/16052#profileId-15106

printhead ptfe guide:

https://makerworld.com/en/models/23655#profileId-26442

to make it smooth and quiet i recommend something like this on top
https://www.amazon.de/gp/product/B0CH1RT61X/ref=ox_sc_act_title_1?smid=A3SQ6E01OW3Z0Q&psc=1

it also could be printed with TPU but i prefer the tape version witch automatically sticks..

this is the cob LED i used - connected to the usb inside the printer

https://www.amazon.de/dp/B0B25711G8?psc=1&ref=ppx_yo2ov_dt_b_product_details

also added a switch for them to turn the LED off without unpluggin the usb
https://makerworld.com/en/models/45182#profileId-46893

switches

https://www.amazon.de/gp/product/B00XA3RDQI/ref=ewc_pr_img_2?smid=A2S6WV1LPVF5CR&psc=1

KEEP MAKING!