Cable Chain PTFE Clip for X1. P1P, P1S by capsel22

capsel22

3D Printer>3D Printer Accessories

Print Profile(14)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

Original Model, 0.4 nozzle

Designer

10 min

1 plate

4.8(859)

Original Model, 0.6 nozzle

Designer

9 min

1 plate

4.9(16)

4x Clips, Brim, Slower First Layer

15 min

1 plate

4.8(82)

6 x Clips, PETG, 0.2mm layer, 4 walls, 15% infill

17 min

1 plate

4.9(22)

Click to see more

Boost

1915

3413

1401

9.4 k

6.2 k

Released

Description

Quick print of a PTFE clip which goes on the cable chain. Prevents the tube hitting the top glass or ams etc.

Printer 0.2 layer heigh with 3 walls. Suggest printing it with PETG at minimum.

It's designed to be tight fit. I found other designs to have either the PTFE cut out too large and the tube would come out or the lips holding the cable chain to be too small, and it clips off.

To fit it, insert the top first onto the cable chain.

Comment & Rating (1401)

@LordBoos

The print profile is no longer public

Prints fast and works just fine from PLA.

@GoldenChild

how is the PLA holding up? seen a few people say the pla will break. and thats all the filament I have right now

@LordBoos

Replying to @GoldenChild :

I works fine as long as you only print with low temperature filaments like PLA and PETG. It can deform if you print ASA for a long periods of time.

(Edited)

@eier1188

The print profile is no longer public

It works well enough. I feel like in the "resting" position of the print head the PTFE tube is almost too long and sticks out to the side, this is the only way I could comfortably put it together without increasing the angle and pinching the tube at the extruder area.

@pwhalen

You can pull that excess PTFE out the back of the printer.

(Edited)

@Petrod

Print Profile

4x Clips, Brim, Slower First Layer

Printed and fitted perfectly. Only need to use 3, as 1 was already in place when printer arrived.

The designer has replied

@SlowEvo

thanks for the positive feedback!

(Edited)

@ZackBlock

Print Profile

Set of 4 - FAST 11 Minute Print - 0.2mm layer, 2 walls, 15% infill

printed very well on his settings. I used Esun Transluecent purple PETG.

@capsel22

Cool purple, need to get some of that

(Edited)

@DIY_Craftic

Print Profile

Original Model, 0.4 nozzle

ASA fit perfect

The designer has replied

@capsel22

This is one clean ASA print, have you done any tuning on it? if so well done

(Edited)

@DIY_Craftic

Replying to @capsel22 :

Standard Bambulab ASA Profile. Glue on Engineering Plate.

(Edited)

@braga3dprint

Print Profile

Original Model, 0.4 nozzle

This print profile provides reliable and robust clips for securing the Bowden tube on the P1P 3D printer. Regrettably, the unavailability of black ASA compelled the use of orange PETG. Despite the color constraint, the PETG material proved to be a resilient alternative, maintaining the clips' functionality and utility, underscoring the adaptability of this profile.

The designer has replied

@capsel22

Love the orange. Gives it a really nice contrast. Thank you for posting your make.

(Edited)

@myworkshoplife

The print profile is no longer public

wunderfull to print. used ASA instead of PETG

@Scrabble

The print profile is no longer public

simple and fast print

@oliverleissoo

The print profile is no longer public

Used for abs, turned out well

@IAMFalco

The print profile is no longer public

Just what I was looking for. Thanks

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

TPU Dust Cover for P1P, P1S, and X1 Z Axis

336

Print Profile(14)

Description

Comment & Rating (1401)

License

Related Models

TPU Dust Cover for P1P, P1S, and X1 Z Axis

Glass Door Side Panel Gap Cover for P1S & X1C

Deutschland Flagge / EM / EM / Flag

Cable Clip Mount