A picture of a woman, have fun!
If you are missing a shelf to put the picture or the other Hueforge pictures on the wall, take a look at my HueShelf ;)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Gray Transmission Distance: 2.5
PLA White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #16 (1.36mm) swap to White for the rest.