Anti Vibration Feet BambuLab
Copyright Claim
Anti Vibration Feet BambuLab
Boost
68
121
19
Print Profile(2)
0.2mm layer, 3 walls, 20% infill
Designer
3.3 h
1 plate
0.2mm layer, 3 walls, 20% infill
3.9 h
1 plate
Open in Bambu Studio
Boost
68
121
19
0
224
93
Released
Description
I modified the overhang for a better printing
I recommend printing the new feets
Link: https://makerworld.com/en/models/181015#profileId-199258
I recommend printing it in TPU 15-20% infill and if you have PEI sheet, put some glue/hairspray/ or in the freezer for a few minutes. it helps to remove the print more easily
Comment & Rating (19)
All
Print Profile
0.2mm layer, 3 walls, 20% infill
Trouble with filament in one place on all feet's..
Next print I set slower speed, but without success, there was same problem..
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
1
Reply
easiest way to separate TPU from print plate is IPA. requires no force to take it off
1
Reply
do you just spritz some on it the print to release it or are you saying wipe your plate with the IPA?
0
Reply
Replying to @siros.work
just use few drops around print and it is "eating in" between plate and print. Perfect separation every time since found that trick
1
Reply
IPA= isopropyl alcohol? do you recommend this for PEI plates as well?
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
works well
1
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
Easy print and works well
The designer has replied
0
Reply
thank you
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
It may be my filament, but I can’t get TPU to print the overhang angle on these as they go up. I printed this profile and sliced on my own, and neither version looks good. This is my first roll of TPU, and while I have had success printing more basic models, I can’t get this to turn out like I want.
0
Reply
thanks for the review, i have redesigned the angle, you can download it from here https://makerworld.com/en/models/181015#profileId-220763
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
great
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
These work great! much quieter. I used ninja flex
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
Strength Issue:I used tpu 95a and they are to stiff
The designer has replied
0
Reply
interesting, try 10% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
1
Reply
License
This user content is licensed under a
Creative Commons Public Domain
© 2024 MakerWorld