Whale pen/phone holder (without AMS)
Boost
90
183
31
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
2.2 h
3 plates
A1 Mini - 0.2mm layer, 2 walls, 15% infill
2.6 h
3 plates
Single Plate AMS
8.2 h
1 plate
Boost
90
183
31
4
247
199
Released
Description
Please use the designer profile, as it was updated and I'm not sure if other profiles are updated.
- No AMS needed for multicolor result. You print each part with one color. 2 main parts and small eyes.
- Can be used to hold pens/brushes/tools and support your phone.
- Easy to print, no supports are needed.
- Easy to put together. Please use your preferred glue that works with the filament (eg CA glue).
Carefully glue the eyes, to not get glue over the whale body. - Enjoy!
Printed model using the new Bambu Galaxy PLA:
Comment & Rating (31)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
sizing of the blue and white parts don't align perfectly. slightly understandable due to different behavior of different material, but does take away from the charm if the product. if the design was more intentional to leave a gap at the front, it can act like a note/paper holder.
The designer has replied
1
Reply
thank you for your review!
i will try and check again the tolerances.
0
Reply
Replying to @FlorinV
there are no tolerances. Basically should fit perfectly, but maybe the rescaling in Bambu studio is not perfect, as the model was created bigger and the profile is for 70% of the real size.
I did changed the profile so that the bottom part is 1mm smaller on y axis (69.5%) and printed again. Seems to fit better.
Thank you for pointing this out.
(Edited)0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
A bit small but beside that it is perfect 🥰
The designer has replied
1
Reply
thank you !! looks good!
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice tool! :)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Everything printed on one plate with a P1s in under 2 hours. I used print by object.
0
Reply
printed great!
The designer has replied
2
Reply
Congrats on having this model featured on the Bambu Lab store, on the new PLA Galaxy page - that's awesome! 😄 🎉 The model looks so nice - might have to give it a go 💪🏼
The designer has replied
1
Reply
damn .... i just seen it now .....Thank youuuu !!!
0
Reply
Replying to @FlorinV
i was thinking you commented in the wrong model :))))))
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
printed with pink instead of blue. super cute.
1
Reply
Print Profile
A1 Mini - 0.2mm layer, 2 walls, 15% infill
Cute, I do not know if it is intended but the top part does not sit "tight" on the bottom, if you lift the top, the whale will split
0
Reply
great print
0
Reply
Boosted
Print Profile
A1 Mini - 0.2mm layer, 2 walls, 15% infill
0
Reply
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld