Tesla Model 3 Seat Hanging Hook by Wiseone

Wiseone

Hobby & DIY>Vehicles

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

Tesla Seat Hook 0.08mm layer, 2 walls, 15% infill

Designer

1.3 h

1 plate

4.3(4)

Open in Bambu Studio

Boost

Released

Description

NOTE: For those having clip cracking issues, please review my version 2 head rest hook for design improvements …

https://makerworld.com/en/models/487082#profileId-399877

Placing bags on the Tesla Model 3 rear seat can have an unexpected surprise. If the bag weighs enough (maybe 5Kg or more), the car will trigger a rear seat belt warning. Rather than disable the warning (child seat enabled), I decided to provide a hanging hook for that bag.

This hook takes advantage of the vertical head rest pillars. These pillars are hidden in the seat design, but with little effort, access can be gained to the pillars. My second hook design secures to these pillars.

The hanging hook was printed in PLA+. PETG would likely be a good plastic, too. I fear a standard PLA may prove too brittle in the pillar clips area. If you try PLA, let me know your experience.

My print of the battery plate is made in eSUN PLA+ 1.75mm black filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. I used print support on the build plate (only). To improve the interlayer appearance, The vertical part is set to 0.08mm layer height.

I hope you can find this design useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

tesla

seat hook

Comment & Rating (7)

@semi484

unfortunately cracked at the forks when inserting into the headrest pillars. This was with PLA +/professional. going to reprint and see if I have better luck with PETG.

The designer has replied

@Wiseone

Thanks for trying my design. The pillar clips are highly stressed, hence the plastic must be able to slightly flex, otherwise it will crack. I will soon revise my design with the aim to reduce the clip stress.

@semi484

Replying to @Wiseone :

I may have overlooked something, maybe not. I just realized as titled this is for the model 3 however, I was trying it on my model Y. A lot of the parts in either model are identical, but im not 100% sure about the seat head rest. when I get an oppertunity ill see if i can verify that and let ya know!