Red Tesla Model Y. Works great as a deco, wall art, sticker, or fridge magnet. Requires black, red, and white filaments.

Printing Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 3 unique filaments

Swap Instructions:
Start with Charcoal
At layer #16 (1.36mm) swap to Red
At layer #21 (1.76mm) swap to Ivory White for the rest.