Modular Stackable Spool Containers - Free 3D Print Model

Search models, users, collections, and posts

Yigit

Tools>Organizers

IP Report

Print Profile(4)

All

H2D

P1S

P1P

X1 Carbon

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.12mm layer, 2 walls, 15% infill

Designer

3.3 h

1 plate

4.8(43)

0.12mm layer, 2 walls, 15% infill

Designer

1.4 h

1 plate

4.8(11)

0.12mm layer, 2 walls, 10% infill

Designer

2.8 h

1 plate

3.0(3)

0.12mm layer, 2 walls, 15% infill

3.5 h

2 plates

4.0(2)

Open in Bambu Studio

Boost

421

1042

665

418

Released

Description

Boost Me (for free)

Feels good to know people appreciating my work

To assemble a single-cell box, simply print the “Bottom + Rim + Cap”. For each additional cell you want to add, print the corresponding “Rim + Connector”. If you need a deeper cell, you can print the “Extension” part and stack two or more spools together. I've added these as print profiles so you don't have to do it manually.

This design features a tight press-fit connection, so no glue is required. If you encounter difficulty fitting the parts, try cleaning the spool edges and gently rotating the spool as you press it into place.

Note: Tested with Creality Hyper PLA spools.

Attention: I would suggest you to measure your spools before printing if you will use other spools. Here are the measurements:

Outer diameter = 89.2 mm

Inner diameter = 80mm

Check out my other models:

**Universal Camera Grip Attachment for Smartphones**

Thank you!

Comment & Rating (77)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.