Dust cap for second 6pin port on AMS

In case you only use one AMS, the second 6 pin port on the back of the AMS is not in use and exposed to the environment. To prevent dust and moisture collecting inside, this cap is ideal to close of the port. Also, useful to cover both 6 pin ports when the AMS is not connected to a printer or in storage.

Features:

• Choose filament to liking.
• No support needed.
• Front side has fillet.
• Dimensions: height = 14.4 mm, width = 16 mm, depth = 2 mm.
• Length pins: 3 mm.
• Self-clamping yet easy to remove.

Disclaimer:

This design is free to download including the accompanied files. By downloading this design, you agree to the following:

• as with all designs that you didn’t make and test yourself, mine may work or won’t for you,
• I can’t give any guarantees for the print you make, the way you do it and which tools u use,
• no rights can be derived and I can’t be held liable.

If you have questions or suggestions, please contact me by message. In case you need an adjustment or re-design, I’ll perform those upon payment.

If you like what I made and want to tip me for it, please do so at your discretion at Ko-Fi.

Have fun and enjoy being creative!