PolyTerra AMS Spool Adapter by bennny

bennny

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.24mm layer, 2 walls, 15% infill

Designer

14 min

1 plate

4.3(52)

Open in Bambu Studio

Boost

310

366

Released

Description

IMPORTANT! This cardboard spool adapter ONLY fits the PolyTerra line of PolyMaker cardboard filament spool. If you have a different PolyMaker line of filament, like PolyLite, PolyMax, PolySonic, PolyMide, PolyWood, or others, please use my other spool adapter here: PolyMaker AMS Spool Adapter.

I designed this Spool Adapter for the Bambu Lab AMS for my PolyTerra cardboard spools, since none of the other adapters currently available fit it properly. This design utilizes the holes of the carboard spools to help lock the adapter in place as well as an anti-slip lip at the top (prints without supports) that will prevent the adapter from coming loose inside the AMS. I exported this as a high quality STL and as a result the curves on the outside have no flat edges and will spin easily inside the AMS. The model only uses 8g of filament.

Orientation of the holes does NOT matter for this model. You may use both the top and bottom sets of holes.

Comment & Rating (73)

@gligoran

Print Profile

0.24mm layer, 2 walls, 15% infill

Printed fine with some crappier old filament I had left over (not the PolyTerra in the picture). It still fits the spool, altough quite tightly, we’ll see if it comes off and can be reused once I’m done with this spool of PolyTerra.

@mk_3dprint

Print Profile

0.24mm layer, 2 walls, 15% infill

nice work

@luna_is_my_dog

Boosted

won’t let me rate but great print and FAST!

@something01

Print Profile

0.24mm layer, 2 walls, 15% infill

Fits 5 different spools and the AMS easily.

@wiktor_malyska

print worked, but pegs are not 100% ideal fit, they are a bit further apart

@dexgtd

Print Profile

0.24mm layer, 2 walls, 15% infill

Works

@alcost80

Print Profile

0.24mm layer, 2 walls, 15% infill

@KinokoLabs

Hi @bennny, What the others say is true. The print is very fragile. I suggest that the base has 3 layers instead of 2, and that is not printed in concentric pattern (at least the bottom and top) since the lines separate from each other with minimal force (while applying to the spool for example).

The designer has replied

@bennny

I’ll make some updates to it, but just be aware that every single one of my models is based on the same base model with just slight dimensional changes to they fit snuggly on each spool. 95% of people have no issues. This should make it obvious that it is user error in the instances where people have issues. But I’ve come to realize that I must accommodate the lowest common denominator, users who have no idea how to 3d print or what any of this means. Bambu Lab makes such good prints that people who violently rip the print off the plate like a Neanderthal are able to use their printers. I will accommodate people like you who cannot successfully print a circle in the next week or two when I get back from vacation.

(Edited)

@KinokoLabs

Replying to @bennny :

I was just giving you a suggestion. I'm not here to be called a Neanderthal! I had no issues removing the print from the plate, never said that I did. I only said that the print is very fragile compared to dozens of similar others that I've printed and currently using on my cardboard spools from PolyTerra. And the only difference is what I said in the first comment, 3 layers on the base, and not using concentric pattern which will make it stronger. Use the information as you wish but don't come here calling me dumb. Thank you

@kill.sincere

Print Profile

0.24mm layer, 2 walls, 15% infill

Strength Issue:breaks so easily

The designer has replied

@bennny

Could you explain how it broke.

@kill.sincere

I went to put it on and when I put it on the part that connects to the outside broke from the top part

@Solitaire

Replying to @kill.sincere :

Do you have Ironing turned on in your slicer for this print? With Ironing on - thin parts such as this will be very fragile.

@muki

Print Profile

0.24mm layer, 2 walls, 15% infill

Print Quality was ok, but didn’t fit my spools…

The designer has replied

@bennny

I dm’d you.

@bennny

@muki could you please respond to my DM?

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (73)

License

Related Models

Dremel spool AMS adaptor v2

Sunlu new reusable spool adaptor press fit

Make My Spool Great Again

Spool for winding filament samples