PolyMaker/PolyLite/PolySonic AMS Spool Adapter by bennny

bennny

3D Printer>3D Printer Accessories

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

27 min

1 plate

4.4(62)

VERSION 2 - 0.24mm layer, 2 walls, 15% infill

Designer

17 min

1 plate

4.4(52)

0.16mm layer, 3 walls, 85% infill

30 min

1 plate

Boost

159

325

151

929

1.5 k

Released

Description

Version 2 out now! Use the Version 2 Print Profile!

The new version uses less material and prints much faster (by utilizing concentric layer lines). It also fits better in the AMS and has a small triangle on the top holes that will help you orient the print onto the cardboard spool. Please use that profile now.

I designed this Spool Adapter for the Bambu Lab AMS for my PolyLite PLA Pro spools, since none of the other adapters currently available fit it properly. This design utilizes the holes of the carboard spools to help lock the adapter in place as well as an anti-slip lip at the top (prints without supports) that will prevent the adapter from coming loose inside the AMS. I exported this as a high quality STL and as a result the curves on the outside have no flat edges and will spin easily inside the AMS. The model only uses 12g of filament.

Check out my other cardboard spool adapters!

Eryone
Overture
JAYO
SUNLU
eSUN
Inland (coming soon!)
PolyTerra (coming soon!)
Duramic (coming soon!)

I have tested this with the following PolyMaker products:

PolyLite
- PLA
- PLA Pro
- LW-PLA
- ABP
- ASA
- PETG
- PC
PolySonic
- PLA
- PLA Pro
PolyMax
- PLA
- PETG
- PETG-ESD
- PC
- PC-FR
PolyMide
- PA6-GF
- PA6-CF
- PA12-GF
- PA12-CF
PolyWood
- Wood PLA

Based on other models I have found, the cardboard spools for the PolyTerra line have different hole arrangements and won't fit this model, but I haven't tested this myself.

If you print this for a spool not listed and it fits (or doesn't), please comment and let me know so I can update this list above. Thank you!

NOTE: The holes in the PolyMaker spools are not uniformly spaced, meaning this model will only fit in one orientation. If you try it and the holes don't line up with the pins, spin it to the next set of pins and try again.

Comment & Rating (151)

@LabRatt

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed again, great again! check edit above a few ratings.

(Edited)

The designer has replied

@bennny

thanks! base mode won’t work for this model, but the z seam shouldn’t affect performance either.

@LabRatt

Ok (:

@LabRatt

Replying to @LabRatt :

darn, I accidentally erased the whole rating thinking I was writing a second one 😑

@Dude3D

Print Profile

VERSION 2 - 0.24mm layer, 2 walls, 15% infill

Haven't had any trouble with it and it printed perfectly, thanks.

The designer has replied

@bennny

looks snazzy!

@Dude3D

Replying to @bennny :

I know rightttt, I'm just loving it and how it satisfyingly shaped into place, thank u so much

@LimeKraken

Print Profile

0.2mm layer, 2 walls, 15% infill

A bit big but works as intended! Would love to see holes allowing filament to be held.

The designer has replied

@bennny

I’m going to add profiles for filament holes sometime this weekend.

@Killdozer666

Print Profile

VERSION 2 - 0.24mm layer, 2 walls, 15% infill

fit is perfect on my Polymaker PLA Pro cardboard spool. will be printing more. remember to use the orientation arrow to line it up correctly before forcing it in. arrow points up. see photo.

The designer has replied

@bennny

thanks for attaching photos of the orientation arrow!

(Edited)

@siros.work

Print Profile

0.2mm layer, 2 walls, 15% infill

These work great! I print them with fuzzy contour on though and the grip is even better.

@mattzzen

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect! Much better than Polymakers own adapter. Slim and fine, works well in ams. Filament I used, #Addnorth Glitz Grey Thanks for this!

(Edited)

@user_528826265

Print Profile

0.2mm layer, 2 walls, 15% infill

Works great!

@wheelwrightmd

Print Profile

VERSION 2 - 0.24mm layer, 2 walls, 15% infill

Great Model. Printed with Sunlu Red PLA+.

@Chavamzamora

Print Profile

VERSION 2 - 0.24mm layer, 2 walls, 15% infill

printed pretty quick on normal speed 👌. feels a bit thin compared to some sunlu ones I've printed but in all honesty seems to fit perfect and works great ! thank you so much. 👌💙😎

@chromos

Print Profile

VERSION 2 - 0.24mm layer, 2 walls, 15% infill

I printed version 2 and had no problems. For this I have a PolyMaker coil where the ring on one side doesn't fit...ONE out of 10...whatever Thanks for the model.

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Spool Adapter for PolyMaker, Polyterra, Polylite

Print Profile(3)

Description

Comment & Rating (151)

License

Related Models

Spool Adapter for PolyMaker, Polyterra, Polylite

esun Adapter für Bambu Spule

Spool adapter for AMS Lite

JAYO AMS LITE SPOOL ADAPTER (PLASTIC SPOOLS)