filament spool table
filament spool table
Print Profile(1)
Description
Table to organize and store the modular filaments.
Based on: https://makerworld.com/en/models/108487#profileId-115847
You only need:
Tube diameter 4 cm or 1,5748 inches.
Printed with SUNLU PLA PLUS. Before starting to print everything it is advisable to see the tolerances on your filament, printing two pieces that fit and testing. On the laminate, you will find a test to test. Try joining them with a lot of pressure or even hitting them with a hammer or other object. This ensures the strength of the table.
The photo is with a 125 cm tube, but you can do it at your choice having to put some foot in between if you exceed 150 cm.
The feet of the table are reinforced both in length and in lateral resistance to withstand weight and movements.
The top board of the table is made at 225 × 225 and then you have a sheet where you can modify that measure by joining the four loose pieces to adjust to your desire.
The whole table can be assembled without glue and simply by making pressure between the pieces, even helping you with a hammer to fit them, since it is very strong. Only the top board you might need some glue to fix the clamps.
This is an example of assembly, but you can design your own by making it taller, lower, longer…
In laminate that appears by default, it is for the design of the photo.
Select the pieces you want, and how many times you want them for your own design
Comment & Rating (3)
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
