Bambulab Glue Stick Tub For Gridfinity System by TheRoboDoc

TheRoboDoc

3D Printer>3D Printer Accessories

GIF

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

No Supports, 0.2mm Standard Preset with Bottom Shell Layers = 5

Designer

1.9 h

2 plates

5.0(1)

6x2mm Magnets Compatible, 0.2mm Standard, Supports Enabled

Designer

2.4 h

2 plates

Open in Bambu Studio

Boost

Released

Description

Model

This is a simple tub which holds the Bambulab Glue Stick. The design uses the features of Gridfinity. For anyone that is new to this system, “Gridfinity could be your workshop's ultimate modular storage system to keep you productive, organized, and safe. It is free, open source, and almost 100% 3D printable.” -Source : gridfinity.xyz

Test print details (Prints shown in the image)

Printer - Bambulab X1C Carbon
Print plate - Bambulab Smooth PEI Plate / High Temp Plate
Material - Bambulab ABS - Silver
- The model is not complicated at all, therefore it can be printed with PLA as well, use the 0.2 mm Standard preset with Bottom Shell Layer = 5.

Details of print profiles

(Please navigate to the print profiles to find the differences between the profiles and individual plates in detail)

Since, the print is used to hold the Glue Stick, it does not require infill more than 20%.

Standard 0.2mm profile
Bottom shell layer to 5 from 3

Comment & Rating (6)

@dresende

My glue stick does not fit 😟

The designer has replied

@TheRoboDoc

Sorry about the late reply. I'm surprised to know that the Glue stick doesn't fit. Could you please give me the length of the Glue stick you have? So that I can check and/or modify the print files. Thanks.

@Fyfor

Replying to @TheRoboDoc :

My glue sticks are too long as well. I've measured all three of them out to be between 99.3 and 99.4 millimeters long. To see if the diameter needs any adjustment, I removed one of their caps and found that it fits perfectly in the print already. So, add about 3 millimeters to the length and it should be good to go! Thanks for the only glue stick print that will fit in my shallow drawers!

@TheRoboDoc

Replying to @Fyfor :

@pfeiffer.steven Hey! Thank you so much for the feedback. I'll make the changes and add it as an additional profile/plate with the updated dimensions ASAP. I'm glad that you are interested in this model. Cheers!