Bambu Lab P1S Poop Slide fully scaleable in OnShape
Remixed by
Copyright Claim
Bambu Lab P1S Poop Slide fully scaleable in OnShape
Remixed by
Boost
20
37
11
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
6.3 h
2 plates
Open in Bambu Studio
Boost
20
37
11
1
199
101
Released
Description
Please note!!
This is a model for my printer with my base.I have anti-vibration feet and a stone plate under my printer.
This can be seen in the drawing as the cuboid under the printer.That's why the trash can is so high!
If you have a different setup you have to change the drawing, and thus the STL, in OnShape!!!
This in turn is simply done using variables defined by me.
I use 12x3 mm magnets for attachment, which work perfectly!
So it's just a draft that everyone has to and can adapt as they want!!!
https://cad.onshape.com/documents/643aba861c50fecb5e1bba56/w/d247a55248251124ae9ff55f/e/aa147db4d33d3caff02ef3ac
Comment & Rating (11)
All
works very well for me
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The box is too high and why are there circles on the design of the slide?
The designer has replied
0
Reply
Please note!!
This is a model for my printer with my base.I have anti-vibration feet and a stone plate under my printer.
This can be seen in the drawing as the cuboid under the printer.That's why the trash can is so high!
If you have a different setup you have to change the drawing, and thus the STL, in OnShape!!!
This in turn is simply done using variables defined by me.
I use 12x3 mm magnets for attachment, which work perfectly! --> Circles
So it's just a draft that everyone has to and can adapt as they want!!!
https://cad.onshape.com/documents/643aba861c50fecb5e1bba56/w/d247a55248251124ae9ff55f/e/aa147db4d33d3caff02ef3ac
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
prints a little thin. Broke when I pulled it off the plate. I would just adjust the settings to make it slightly more sturdy.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld