Organizer Box / Boxes by Benjamin Kott

Benjamin Kott

Household>Office

Print Profile(19)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Box 15x8x6cm, Corner 2cm

Designer

2.1 h

1 plate

4.9(143)

Box 20x10x6cm, Corner 2cm

Designer

2.9 h

1 plate

4.9(47)

Box 8x8x8cm, Corner 2cm

Designer

1.7 h

1 plate

4.8(93)

Box 8x8x10cm , Round

Designer

1.9 h

1 plate

4.9(43)

Click to see more

Boost

1587

3126

643

5.7 k

4.7 k

Released

Description

Organizer Box (Fully Parameterized) with Fusion 360 Source Files.

Use the available print profiles if you want to have a specific size, if you are more into tinkering fetch the Fusion 360 file and enjoy all the customizable parameters. The model is designed so that all punch holes are auto-calculated and evenly spaced. No need to fiddle around with manual settings, just define the basic parameters and watch the magic math 😊. Punchhole rows are auto-calculated and will center on the outer wall.

Customizable Parameters:

Height
Width
Length
Wall thickness
Punchhole Diameter
Punchhole Spacing
Corner Radius
Save space on the top and bottom

Customizing Tips:

If you adjust the width and length, it can be helpful to adjust the corner radius before making changes.
If you adjust the corner radius, ensure that the desired size fits your desired width and length.
If you want to create a round object. please ensure the width and length are matching. Configure the corner radius to ½ - 0.01 of the width or the length. Example: You have a width of 80, set the corner radius to 39.99.

Why another box model?

There are a lot of box models already available, but all I found were static,

or have features or design aspects that did not fit my needs.

I need a model flexible, that can easily adapt to any size I need - and also would be approved by my wife.

Maybe I also wanted to play around with repeating auto-calculating patterns in Fusion 360, okay okay - you got me.

I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!

Print Profile

Box 8x8x8cm, Corner 2cm

The top most row of holes were skewed a bit. Some banding on the holes. Not sure why.

The designer has replied

@benjaminkott

It´s a common problem with round holes printed vertically, you will not be able to get it away if the holes need to punch through - sadly. Support could help, but then you need to break every hole free, no one wants to do that, and takes ages to print. Adaptive layer height can mitigate some, had it on a large box print of mine, did not help as much as I wanted. You will not get it perfect, without closing the holes to also avoid seams on every hole. There is not a lot I can do - Sadly. You can also see those lines in the pictures of the model if you look closely. I just accepted it, i do not notice them really on a day to day - unless i take a really close look 😅.

(Edited)

@vaolmedo

Replying to @benjaminkott :

Great model though! I think it's probably a setting on the setup to print it. I'll experiment to see which settings and filament work best for this model.

@vaolmedo

Replying to @benjaminkott :

Better result with Basic PLA and .20 layer height. Also, 3MF vs GCode.

(Edited)

@Verounsen

i wanted to change the width to 30mm but it didn't work out so i found out the smallest possible value was 45.. i'm gonna use this as pen holder for blackboard markers.. the magnets are 36x12x2mm (I used the magnets that came with the bambu lab printer intended for the scraper print) it printed well😊 thank you!

(Edited)

The designer has replied

@benjaminkott

you need to adjust the corner first, then you can go lower. there are some tips in the customizing section.

(Edited)

@Verounsen

Replying to @benjaminkott :

ok thanks! if i make another one, i read your whole description, first (oops😳)

@corky008

Print Profile

Box 15x8x6cm, Corner 2cm

only printed a couple but the wife wants more for storage around the house goi to make a few bigger

The designer has replied

@benjaminkott

Perfect, also needed to do some specific sizes for my wife´s needs 😅. If you have a size in mind that could be useful to others, let me know so we can add a profile for them.

(Edited)