Halo Type-25 Directed Energy Plasma Pistol

This Halo Plasma Pistol does not require an AMS. 

There are 18 parts split onto 4 plates [with each color used for the print in the images].

Plate 1: Small Parts – Matte Ash Grey (11102)

Plate 2: Plasma Pistol Frame – Matte Charcoal (11101) 

Plate 3: Middle Magazine – Matte Ice Blue (11601)

Plate 4: Plasma Pistol Upper & Lower – Matte Lilac Purple (11700)

You can find each of the filaments used in the Bill of Materials beneath this description. 

How do I assemble my Plasma Pistol?

After printing all parts, insert the Middle Magazine Topper into the Full Upper. Then, add the Upper Top Shell & Upper Shell Sight to the Full Upper. Finally, add the Top Firing Teeth. 

DO NOT do the Pistol Grip yet.

For the bottom, slide the Primary Lower Grip into the Primary Lower followed by the Primary Lower Back Insert. Add the Bottom Firing Tongue & Bottom Firing Teeth.

To connect the top and bottom, press the Middle Magazine Insert into the Middle Magazine [using a rubber mallet or even pressure], and connect it to the Lower first. This is a tight fit, so apply some pressure & be patient. After the magazine is in the lower, gently angle insert it into the upper.

Now, you'll want to press in the Upper Rear Sight, push the Pistol Grip Pegs through, and add the Safety Switches.

To finish the build, snap in the pistol grip & enjoy!

What kind of epoxy/adhesive did you use?

I use J-B Weld Pro Size ClearWeld 5-Minute Set Epoxy for large contact areas, J-B Weld Superweld™ Light Activated Instant Glue for edges/cracks, and Gorilla Super Glue Gel for small contact areas. 

How do I assemble my M6G with an A1 Mini?

As of 1.23.25, there is no A1 Mini option available.

Will the gun stay together?

No, this gun will not stay together without super glue or epoxy. Luckily, super glue should be fine for this build.

Support me by listening to my music: https://spoti.fi/3Yg7XoH