Bambu Lab Reusable Spool Holder Remixed by XentoBi

Remixed by

XentoBi

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

6.4 h

2 plates

4.9(83)

0.2mm layer, 2 walls, 15% infill

Designer

6.4 h

2 plates

4.9(11)

Open in Bambu Studio

Boost

243

475

898

1.1 k

Released

Description

Model Description

“v2” version has no label area in case you want to save even more filament. Otherwise, print the “v3” versions.

The original Bambu Lab spool holder works well but takes a lot of filament and is missing a few nice features, such as being able to see how much filament is left on your spool, having passthrough holes for respooling, and more places to stick the loose end of your filament.

The original locking mechanism is unchanged, and these will work interchangeably with the original version if you only want to do one side or something. The lock tab is still there for accepting the Bambu Lab refills and the original shims work as well if you want the extra locking power.

I would recommend you print this in something that can withstand a dehydrator. I used ASA.

I printed in 0.2mm layers without supports, with a light glue coating on the bed for ASA.

Descrizione Modello

La versione "v2" non ha un'area per l'etichetta nel caso in cui desideri risparmiare ancora più filamento. Altrimenti stampa le versioni “v3”.

Il porta bobina originale Bambu Lab funziona bene ma richiede molto filamento e manca alcune caratteristiche interessanti, come la possibilità di vedere quanto filamento è rimasto sulla bobina, avere fori passanti per il riavvolgimento e più posti dove attaccare il filamento sciolto estremità del filamento.

Il meccanismo di bloccaggio originale è invariato e funzionerà in modo intercambiabile con la versione originale se vuoi fare solo un lato o qualcosa del genere. La linguetta di blocco è ancora lì per accettare le ricariche Bambu Lab e anche gli spessori originali funzionano se desideri un potere di chiusura extra.

Ti consiglierei di stamparlo in qualcosa che possa resistere a un disidratatore. Ho usato l'ASA.

Ho stampato in strati da 0,2 mm senza supporti, con un leggero rivestimento di colla sul letto per ASA.

Comment & Rating (99)

@precisionprint

Print Profile

0.2mm layer, 2 walls, 15% infill

really good in petg

@wood_mistry

Print Profile

0.2mm layer, 2 walls, 15% infill

excellent product

@user_2314620091

Print Profile

0.2mm layer, 2 walls, 15% infill

Works perfectly in my AMS

@user_2949356595

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Thanks for the design. Print came out perfect. and the desiccant containers fit perfectly :D

@JCastaPrints

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed 4 of these in Duramic Marble PLA and dig the look of them...they turned out great and super sturdy! Perfect for what I needed and was looking for 😁👍🏻

@jeffrudzinski.p

Print Profile

0.2mm layer, 2 walls, 15% infill

It works. Nothing special. Probably a bit flimsy but not bad.

@eissner.joerg

Print Profile

0.2mm layer, 2 walls, 15% infill

keine Probleme beim ausdrucken. alles passt super zusammen und hält auch zusammen. bin sehr begeistert

@user_1560743052

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed in ASA, came out nice

@LastChanceCycle

Print Profile

0.2mm layer, 2 walls, 15% infill

I use it as receptacle for refill orders from Bambu Labs to save some $ and as swatches. The two halves twist and lock together just like the ones @ Bambu Labs. The cardboard tube with the RFID fits perfectly in the center of the spool so your AMS will recognize what type/color your filament is. I highly recommend it for new 3D printer owners, it also makes it super easy to keep your inventory organized. It also has an oval spot to put the sticker that shows gradient lines.