Gwirad the Maker

Kit Crafters

<h2>Happy Holidays!</h2>To usher in the Christmas and holiday spirit, I present the Gingerbread House Kit Card! It features an easy to assemble model, with simple but great colors that print surprisingly well with the AMS or AMS Lite. Created by Kit Crafters!<h4>Included are 5 profiles:</h4>X1C/P1S/P1P<ul><li>Multicolor Frameless</li><li>Multicolor Framed</li><li>Single Color Frameless</li></ul>A1 Mini<ul><li>Multicolor Frameless</li><li>Single Color Frameless</li></ul>The prototypes and final prints were all done with Bambu Lab PLA Basic/Matte. The final model uses <a target="_blank" href="https://us.store.bambulab.com/products/pla-matte-filament?variant=41201616126088" rel="nofollow noopener">Matte Latte Brown</a>, <a target="_blank" href="https://us.store.bambulab.com/products/pla-matte-filament?variant=41078280061064" rel="nofollow noopener">Matte Scarlet Red</a>, <a target="_blank" href="https://us.store.bambulab.com/products/pla-matte-filament?variant=41201615569032" rel="nofollow noopener">Matte Grass Green</a>, and <a target="_blank" href="https://us.store.bambulab.com/products/pla-matte-filament?variant=41078280159368" rel="nofollow noopener">Matte Ivory White</a>. I absolutely adore kit cards and this one was inspired by <a target="_blank" href="https://makerworld.com/en/models/49240#profileId-51175" rel="nofollow noopener">berri3D's winning Halloween design</a>. <a target="_blank" href="https://makerworld.com/en/u/617127399" rel="nofollow noopener">Check out their work!</a>&nbsp;When printing the Gingerbread House Kit Card, different filaments and calibrations may make it too loose or too tight for the magnet to fit. I recommend changing the X-Y hole compensation to make it closer to being too loose so that the magnet can be inserted and super-glued if needed. The uploaded profiles need no changes for the X-Y hole compensation that I find works very well with Bambu Lab PLA.&nbsp;Thanks all for your support, enjoy the model as well as your holiday season!&nbsp;- Kit Crafters

Gingerbread House - Kit Card

Christmas

GlennovitS 3D

Need boxes to store and organize your bits and pieces - or just organize your messy drawer in your desk - then print some Gridfinity boxes! These are quick to print - yet sturdy enough for most usecases.These lite bins shows the grid in the bottom of the boxes, instead of a flat surface. This saves A LOT of filament and printtime in the long run! But if you for some reasons need a flat bottom in the boxes, please see my Classic Boxes.The Gridfinity system is made to fit into a grid as a base - and these boxes can be stacked if needed.<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/425849/2024-01-19_ec1bd933a0909.jpeg"></figure><h2>Types</h2>There are 2 variants of boxes in this collection - with different benefits for you. If in doubt, try one of each and see for yourself what you like the best.<ul><li>0.8 mm (the thin version - 0.8 mm walls - to save some filament)</li><li>1.2 mm (the stronger version - 1.2 mm walls - a little stronger for heavier items)</li></ul><h2>Sizes</h2>They are organized in folders (and Bambu Project files) with different size categories for you to easier find the size you need. Within each folder are alle sizes of boxes.Files are named by the default Gridfinity standard AxBxC-D<ul><li>A: Width of the box (each section is 42 mm)</li><li>B: Length of the box (each section is 42 mm)</li><li>C: Height of the box (each section is 7 mm - fx. 6 = 42 mm heigh)</li><li>D: Thickness of walls (0.8 mm or 1.2 mm to be filament friendly or stronger)</li></ul>Boxes come in sizes from 1x1 (42x42 mm) to 6x6 (252x252 mm)<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/425849/2024-01-19_5249119036c7c8.gif"></figure><h2>Want more Gridfinity? YES!</h2>To organize the boxes in a drawer or on the desk, use the baseplates for the Gridfinity system.Or maybe want a tray, pen holder, circular holder or more? - see my other projects!<a target="_blank" href="https://makerworld.com/en/u/1370313339/collections/427128" rel="nofollow noopener">https://makerworld.com/en/u/1370313339/collections/427128</a><h2>Print instructions</h2>These tips can maybe help<ul><li>Speed on first layer: 50% (or less) (To ensure good bed adhesion and perfect fit)</li><li>Supports: NO supports.</li></ul>&nbsp;Happy printing!And special thanks to Zack Freedman for starting the Gridfinity System!<h2>Want to show your support?</h2>You can see ALL my designs here on Printables - and you can become an active supporter. I would really appreciate it!⭐️ <a target="_blank" href="https://www.printables.com/@GlennovitS3D" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D</a> ⭐️

Gridfinity Box Lite - Filament friendly bins

Organization

sal479

Bunny Earring

Easter

BaGooN

This 2-digit counter boasts a stylish design! It features a wheel with a satisfying click. Each number comes to a stop with a click. and easy snap on assembly.  Assembly: 0. print a total of 5 parts: ‘Case_M’, ‘Case_F’, ‘Spring’, ‘Wheel_A’, and ‘Wheel_B’. Choose either the Standard or Reversed case, and select either Normal or Soft for the spring.<figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/703486/rich_content/7362f4e4-28b5-4ab5-acef-db401e1f07f8/pxl_20240103_060235384portraitoriginal.jpg"></figure>1. Put the wheel onto the 'case_M' part and check its rotation. If it feels stiff, use sandpaper or apply a small amount of grease to the inside of the wheel. (When you choose the reversed design case the wheel numbers must be placed downward.)<figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/703486/rich_content/f0535263-8f1b-4168-b592-04e314f1de00/pxl_20240103_060300968portrait.jpg"></figure>2. Put the spring onto the ‘case_M’ part.<figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/703486/rich_content/fec23d3a-15b6-4ffa-83a8-a7e0b2deae25/pxl_20240103_060321955portrait.jpg"></figure>3. Snap-on the opposite side of the case.<figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/703486/rich_content/f83631a3-d42f-4bd9-b06d-afe685202bfa/thumbs/cover/800x600/jpg/pxl_20240103_060419489portrait.webp"></figure>Notes:<ul><li>Recommended layer height: 0.15 - 0.20mm, In my case with slicer, layer heights above 0.28mm, the spring, wheel clearance lost are do not function.</li><li>Do not use Matte PLA, Silk PLA, as they have weak layer adhesion and can break with snap-on.</li></ul>

Clicky Rotate Counter

DnD Items