Gwirad the Maker

0.2mm layer, 2 walls, 15% infill

Springy Spring Customizable Flower Bed

0.16mm layer, 2 walls, 15% infill

Garden Fairy Sign

Wasp Kit Card

4 Color, 0.2mm layer, 3 walls, 5% infill, Textured PEI plate

Griffith Observatory

0.08mm layer, 2 walls, 100% infill - With AMS and X1C

Ancient Red Dragon Hueforge

0.2mm layer, 3 walls, 40% infill, tree supports enabled

HSW Spool Mount with bearings - supports heavy spools

ferrofem

A1 Mini - 0.2mm layer, 2 walls, 15% infill

Under desk mounted tissue box holder

christhielges

Simple magnet hook

Simple hook 0.2mm layer, 2 walls, 15% infill

Longracks Labs

Dry Pods and Desiccant Trays for AMS

DjangoCashflow

Adorable Secret Keeper Egg Bunny

Small

Brandido02

Bambu Reusable Hex Spool

Hex Spool v3.2

MingGY

月球盒子 moon box

Moon Box

0.2mm layer, 3 walls, 15% infill

Printed beautifully!  A good tip for joining the two sides is to do a slight backwards turn first, it will pop into place and you can thread it more easily.

Ciuf_Ciuf

Cute Loch Ness Dragon

0.16mm layer, 2 walls, 5% infill

Started using this in place of a benchy to better show the properties of multi-color filaments, and how they react when moving on an organic object.  This is great!  Thank you!

TwistyPrints

Articulated Cute Dragon

0.2mm layer, 2 walls, 10% infill

Printed very well.  Thanks for the cool model!

Muunk Studio

Catapult Kit Card_Designed by Muunk Studio

0.2mm layer, 2 walls, 20% infill, Tree Support

Love it.  Printed beautifully.  Super tight fit on some of the pieces, so did a bit of sanding to get them to work.
Thank you!

Mimi home decoration

easter landscape kit card 

A1 X1 P1 A1 mini

With one exception, it prints great.  The exception being that the base doesn't fully attach to the card, and tends to pop off when removing from the print bed.  

Michele MM3D

Phone Holder

J3DPS

Shamrock Love Script

Halfway_Engineered

Metric screw and nut gauge card with protractor

PLA 0.16mm layer, 3 walls, 13% infill

Printed great, but I had a few issues related to bleed of color from one to another, given the transparency of the PLA.  However, that’s on me.  The profile worked perfectly.

VictorS

Mini foldable box card

PLA 1 color 0.16mm layer, 3 walls, 13% infill

Such a tiny little box!  
Not sure what it’d be useful for, but the profile worked great.

Benprints

3d Printer Tolerance Test

Print worked well.  I did notice quite a bit of unevenness on it.
The tolerance test showed my printer at .35 and higher is good, though previous tests have shown as low as .15, so I’m not sure on how accurate this one was.

Lollipop Woodworks

Bambu Tools Holder for Honeycomb Storage Wall & X3D-v3 Riser

0.24mm layer, 3 walls, 100% infill

Printed well.  The tools fit perfectly, and the posts attach into the HSW great.  Thanks!

marpicio7

silica gel container for bambulab spool

BaGooN

Clicky Rotate Counter

Two Colour Body, 0.2mm layer, 2 walls, 15% infill

Printed great.  I moved to the two color with the dominant color on the wheel being different than the body.  Helps my old eyes to see it better.  Nice model!

AU3D

ELEGOO Cardboard Spool Adapter

200mm Diameter | Flat | Full AMS Compatibility

Printed extremely fast and had no issues with the print profile.
I printed in Overture Matte PLA, and the fit was perfect.

CustomCreations

Panda with heart coaster

Colored in the heart, used Overture Red Matte PLA.  Beautiful print, going to make 4 total as a set for my panda loving wife.

Nice work!


3D Color Hub

Silica Desiccant Dry box for Bambu Lab AMS - Airways for Hydrometer and Resized Lid

Came out great.  Printed in PLA+ at .20mm layers on X1C with .4mm nozzle on engineering plate.  No adhesion issues, hygrometer fits perfect.

No supports needed.
Total print time was 1h25m50s and used 29.11g of filament.