Very nearly perfect! The grids for the drawers fit perfectly to the point it felt like magic, but unfortunately the upper L/R ones are slightly too long (hard to explain orientation), and I had to grind down the edges that would be facing the hinges and the front of the box on both of them. Not a huge deal, but considering how nicely the other ones fit I wasn't expecting to have to do that. Minus that one problem they printed fast and smooth with no other issues, and if I end up using them on the other HF box I've got I'll try trimming the top L/R ones just a tiny bit before printing.

Printed with zero issues and the channel is perfectly compatible with the noted diameter of spline that I was able to find at my local Menards. Haven't gotten to the actual screen stretching yet, but the print is 10/10

Printed flawlessly, instructions were pretty easy to follow, and I'm sure my partner (Swaxe main) is gonna love it :D

Printed with zero issues, I did a dual-color one by pausing the print halfway through and swapping filament for a cool effect.

I opted to not use the 'pins' provided and bend my own out of an appropriately gaged wire, and while unfortunately due to my own error some of the supports on the main body failed, that part still printed well enough to work. Unlike others, I didn't have any issues with screwing the parts together and had no gapping or mis-fitting for the loom parts that hold the pins. Once I get a handle on more easily making the wire pins, I'll definitely be printing a few of these for my textile friends!

Incredibly cute, super quick, and printed like a dream -- I created a basic p1p print profile for it that I'll be uploading later for anyone who wants to use it. I'm probably going to print it again at a larger scale for actual cookie usage but this'll make SUPER cute stamped clay pieces for my Mario Kart-loving friend group. No picture right now unfortunately but I'll upload one later!

Printed smoothly, I opted for a speckled/marble PLA for a little statuette look. Bigger than I was expecting when initially looking, absolutely not a bad thing though, it's the perfect size for decor purposes. Here's hoping it brings a little luck!

Printed beautifully, this was my first major print on my p1p and minus a little stringing (my bad, filament wasn't the absolute driest) that was easily taken care of with the blowdryer, it was absolutely perfect. I'll be hitting it with some dry brushing but it currently sits in a place of honor next to my Edgerunners TTRPG boxset.

Printed like a dream! I didn't opt for any of the inserts this time, but if they're anything like the main body they'll be perfect.