I believe to get all of the lid black and different color from roses go to layer 48/7.72 for the color change for roses. . I used the 5 star HIGH QUALITY ROSE HEART BOX uploaded by Voltec3d and printed on X1C AMS 2 .4 noz using filiaments BB Black PLA basic with SUNlu Red silk. The silk was freshly opened and in hindsight should have been dried first but you have to be a 3d printer person to have notice the two rose petals that had a hole and a pilling, a filing and fake raindrop poof fixed. ZERO layer lines in the box. The center rose is the lid handle, the lid easily opens and closes using this rose; however, the lid has engineered tabs to make it secure and only obvious if you try to open the lid other than the center rose. The level of thought and engineering was impressive. The lid does sit inset to the main box, just beautiful. The photo shows the pla silk needed drying, but to the human eye not as obvious.

BB x1c w AMS2 printed all sizes in batches. The only issue was with last batch I left on plate until next morning and 2 of the four smalls had to be popped into the microwave for 22 seconds to get the winder to spin. All prior batches that were not left more than an hour hac zero issues. I color code mine to denote the USB end type C, lighting, etc but all filaments were BB PLA basic (the white was BB marble). The small can take alot more cord than you think, definetly more than a 3 ft cable. If ratinogs are allowed updates I'll update lengths of cord and cord mm once I get back to organizing cords. If you ever need to open one I found a flat head screw driver in combo with channel locks to grip the edge worked, worked twice so far.

Works great for both C and yes the A too, but super loose on lighting but usable. They also fit some barrel plug cords on other chargers. I color coded these and the cable winders to denote white=lightiong, black=C, etc.

EXCELLENT functional print. Medium BB marble PLA used for two mediums for 6 foot apple lighting cords. Currently printing four small in BB black PLA basic for the short 3 foot apple usb C cords. I’m using colors to denote the type of cable so I can grab one by color without having to inspect the ends.

EXCELLENT PRINT. My first FUN print, thank you Saber3d for sharing and providing profiles. X1C color 1 sunlu gold, color 2 BB Dawn Radiance silk. Lessons learned, when using gradient silk pick single color dragon, multi color poops a lot.

Did not use myself,was a gift to a lego junky. update, recipient stated broke when putting it together. He was supplied with the maker URL to get hints and tips as a heads up/workarounds posted by others. I do not know if he referenced the link. Update: Receiver of gift said it broke when assembling but was affraid to tell me.

The clip will interfere AMS dry rotation if rolls full. Most folks don’t know that filaments can become brittle if NOT TIGHTLY wound on reel, yep, loose on a reel equal loss tension equal brittle. Opposite of gut feeling that constant tension would hurt it.