Simple print. The iris separates easily and works smoothly.

This puts the fun in functional. It requires some patience to separate the shells but it works very well. I only had smaller magnets and it closed and held so well even without them it was more an esthetic than functional fail on my part

I did bot ASA (in picture) and PETG. Both printed perfectly and handle quite the load

Great Advent 'Calendar'. Photo doesn't want to upload (?) but I did the walls in red and the windows in white - looks festive in a non-gingerbread way :) If the roof could be flattened (hinges? two pieces?) it would be a perfect gift for a large envelope as a small puzzle for a present. Fantastic the way it is - prints well and the roof keeps it solid.

Whimsical and printed very well. I found it necessary to put the teeth in before gluing.the eyes into the lid as the guides will snap into the rails but they also snap off of you push too hard.

Practical & fits my razor (Henson) perfectly

I printed three other stands/holders before finding this one that worked perfectly. It doesn't demand sharp curves on the cable and doesn't take extra space on the nightstand. For my Galaxy Watch 8 the size of the charge head is smaller than the model but no big deal. I changed the support to organic trees only on the build plate. I did that because the default is standard and mostly on the lower jaw. I didn't trust my klutz-ish tendency to not destroy the jaw. The trees popped right off and the surface is smooth.

Just the right balance of flexible and weight. Printed perfectly too

Works like a charm :) I modded a slightly wider, deeper pocket for a larger wall clock but 100% credit for the design.

Works like a charm, prints in the material of your choice (I've done PLA & ABS) and is a great conversation starter at the range. This is one of my favorite models out of ~600 prints.