The “Optimized for strength: 5 walls”print profile is top notch rock solid. I can recommend it and the design without hesitation. And unlike so many phone stands, this one doesn’t tip over when you put the phone at an angle away from the center of gravity. Well done! Printed in PETG-HF

Only 4 stars, because the magnet holes are too small. It it is physically impossible to fit 6x2 magnets into the (measured) 5.5x2mm holes on top of the body. The bottom magnet holes are also too small, I had to hammer in several magnets with a punch. Standard hole size specs are 6.3x2.2mm. Unfortunately, I didn’t try to insert magnets until I printed 3 of the bodies. Ouch, because without top magnets, the bodies won’t work for their intended use case. I will try to find some 5x2mm magnets to work around the issue. Stil, the hole sizes should be fixed. Please let me know once you uploaded a new rev. Thanks!

Printed great in PETG-HF. The coarse teeth work well with paper-based tapes. For plastic-based tapes, a variant with finer teeth would be appreciated.

5-Stars with ease. See the my detailed text included with the Double Boost of this model for as to why.

The print worked well with the original print profile. The set of logos provide for a good choice of options to pick a logo that make sense to the person printing it. Unfortunately, the box does not have magnet holes. @Lukas, please add magnet holes. There is no downside. If one doesn't need magnets, don't populate the holes. It is really difficult to add correctly-positioned holes in the slicer. The designer can trivially add magnet holes to the CAD. Those who need magnets thank you!

This collection is a godsend, especially for folks like me that don't know how to use CAD software. More details in the Boost to follow.

@regun Kudos for the design and appropriate strength settings. See my Boost to follow for suggestions for improvement.