works well. it is for the 1st gen mag charger ( the one with the smooth cable, the 2nd gen is fast, smaller and has a braided cable). it is a bit a loose fit, but a piece of double sided tape keeps the charger in place.

nice print. appreciate the ability to print it straight from the handy app instead of downloading the original to Bambi studio. thanks.

handy print.

useful design. I have used it a few times to dry the beads for my AMS.

good design.

nice design. the letters on the cover could have been more layer to help them show clearer.

useful print to allow spong to dry.

useful print.

great design.

useful print.

useful print.

good design. be careful as I tipped mine over and the 2 slot hood fell about 3 feet and cracked, which is why one is grey and the others are green as I was out of green to reprint the big one.

useful print. not all the letters on the cover printed legibly.

Good solution for being able to turn the machine on from the front. I needed to use a small dead blow to fit the pieces together as they are a very tight fit. I also needed to ream out the front hole for the red nub with a 1/4 bolt to be able to screw the red nub in.

great design. I printed out several to organize my gun safe.

good print and design. had some interesting on all the curved edges. I printed from handy app on an X1C

nice print.

good useful design.

very useful print.

very useful print for attaching the fins to rockets. I printed a few out for our Cub Scout pack rocket launch.