excellent model. printed just great. doesn't quite hold a 10' cable, but it works fine for what I need

Love this. First print came out ok, but some bit of wonkiness at the bottom. Second print is great using the variable height adjustment suggested by @Kingac_CZ Only suggestion I have for your original design is to make the opening a little larger for the A1 Mini. Guys like me with big hands might struggle getting into the thing.

great print. any chance you can make a box for .06 and .08?

Had a spectacular failure first print, the supports came loose. This time I used the Super Tacky buildplate and it printed perfectly.

damned cool print. I increased it by 200%, after I printed the original size and both turned out great. Had some trouble cleaning up the bottom of the large print, but nothing that can't be sanded.

turned out great. I had to reprint the mount because one leg broke, but that was the result of my filament becoming tangled and the print was interuped a couple times

these are great, I made a ton of them

printed great. I increased the circumstance by 10% and it still fit on my A1 Mini's build plate. I think I may print another and increase the height just a bit

this printed just great. The only issue I have is the "bump" on the corner pieces is slightly too long, which makes the space on the top of the corner too small for the frame to properly rest on them.

printed perfectly. this shelf is just awesome looking

nice print

very nice idea. printed great for me using Bambu PLA Metal Dark Grey. One small suggestion, can you make the handle opening just a touch bigger. As you can see from the photo, my U of U Hospital mug's handle is slightly bigger than the cutout (25mm or 26mm would be about right). I can easily sand the opening to make the handle fit.