e-lilian

Augustas

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136916/design/2024-03-23_e3aef21a74483.png"></figure>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/augustas" rel="nofollow noopener">https://www.buymeacoffee.com/augustas</a>&nbsp;This stylish and functional 3D printed car trash can is the perfect way to keep your car clean and organized. The sleek design features a patterned side panel and a movable lid flap for easy trash disposal. It can also be used as a desk trash can.Features:<ul><li>Stylish and functional design</li><li>Patterned side panel adds a touch of personality</li><li>Movable lid flap for easy trash disposal</li><li>Can be used as a car or desk trash can</li><li>Easy to print and assemble</li></ul>Printing Instructions:<ul><li>Recommended filament: PLA or PETG (with a 0.2mm nozzle)</li><li>Layer height: 0.2mm</li><li>Infill: 20% (or higher for a more durable trash can)</li><li>Support material: Not required</li></ul>Enjoy your new 3D-printed car trash can!&nbsp;!! This is my model I created it following Brandon Santana YouTube tutorial, I Added some details and made it fit more loosely. But it is still my own design please do not flag this as a copyright!!Link to the tutorial : <a target="_blank" href="https://youtu.be/ci4JB_NZ7ks?si=zwvmFfeb0jTwzHsA" rel="nofollow noopener">https://youtu.be/ci4JB_NZ7ks?si=zwvmFfeb0jTwzHsA</a>.

Car Trash can

Various

HG_Design

Pencil box.Can be used has pencil holder to.Choose your color and print.

Pencil box

Office

Fresh Brewed Design

Your cat(s) deserve the freshest canned meat product and nobody wants old cat food lurking in the back of their cabinets. This dispenser serves up your cans in first-in, first-out order. The dispenser prints without supports and no hardware or glue is required for assembly.&nbsp;Design<ul><li>Holds 8 3oz cans per dispenser (note: tested with Fancy Feast cans which have about a 66mm diameter and a 37mm height - you may want to check your cans before printing if you prefer a different brand)</li><li>Cans roll smoothly from top to bottom for easy loading</li><li>Fits in a 12in deep cabinet</li><li>Slim profile makes it easy to fit multiple dispensers side-by-side</li><li>Printable on a 180x180mm print bed (e.g., Bambu A1 Mini, Prusa Mini)</li></ul>Dimensions (LxWxH) 280.5x47.6x172.8mm&nbsp;Print settings Nothing special. I test printed with PLA and slicer defaults. STLs are oriented as recommended for printing.&nbsp;Assembly Assemble by sliding the corresponding dovetails together. When assembled correctly, your pieces should all sit flush on both the interior and exterior surfaces. The dovetails should be a fairly tight fit.<ol><li>Print all four components (left front, left back, right front, right back)</li><li>Attach left front to left back and right front to right back by sliding the dovetails together. Ensure all 3 dovetails are engaged on each side. You may find it easiest to partially engage the larger dovetail at the bottom before aligning the middle and top dovetails.</li><li>Attach the left half to the right half by sliding each set of dovetails in from the bottom. You may again find it easiest to start from the bottom. Just make sure top, middle, and bottom dovetails are secure front to back.</li></ol>Notes<ul><li>If you have a larger printer, I&#39;d love your help in testing out additional sizes. I may also do a 12 can version in 6 parts if there&#39;s interest!</li><li>If you plan to remix this, be aware that most cans aren&#39;t simple cylinders. In real life, the cans sit at a slight angle due to the lip around the top. This increases their total width by enough to make a difference. The design accommodates this to avoid an otherwise dispenser-jamming amount of friction between the cans and the side wall.</li></ul>Inspiration/credits<ul><li><a target="_blank" href="https://www.thingiverse.com/thing:4428664" rel="nofollow noopener">Aeris - Cat Food Can Dispenser (modular) by Erdrick</a></li><li><a target="_blank" href="https://thenounproject.com/icon/cat-6048434/" rel="nofollow noopener">Cat icon by Kim Sun Young on The Noun Project</a></li></ul>

Cat Food Can Dispenser

Fletch

Spring has started, so that means it&#39;s time to get the greenhouse ready for some fresh veggies! I wanted to do some thing a little fun and different this year, so I decided to make some Mario themed seed starters for getting the plants ready. These pots are self watering, so you don&#39;t have to worry about watering them every day.&nbsp;Place a cotton ball or any wicking type material in the bottom part of the small pot. Screw the bottom onto the pot, add some dirt and seed, add a little water to the dirt, and you&#39;re ready to go. Make sure the water stays below main pot, so that the wicking material stays wet and keeps your plants happy!&nbsp;When you&#39;re ready to transplant, unscrew the bottom of the pot and push up!&nbsp;UpdateA profile for a humidity dome has been added. I decided to go with individual domes for each pot after a lot of experimenting. It somehow came out requiring less plastic and print time when printing 6 at a time vs a single dome covering the entire 3x2 tray. I recommend letting the build plate cool before trying to remove as it is only 2 surfaces and single wall. The print speed is turned down a lot to improve clarity.

Mario Seed Starter Tray - Self Watering

Anime, manga, videogame, film

Man of Mystery Intl.

13 Feb 24: Check the remix tab for a nifty Karrotana Display Stand!&nbsp;Now you can take your impractical toy sword with you on the go to the grocery store. Stick this fake carrot in your shopping cart with all your other vegetables and no one will be the wiser. Have it on standby for quickdraw in the case of an unwanted altercation in the chip aisle.&nbsp;Go for a walk, just holding your big plastic carrot in your hand like a completely normal person. Now if someone looks at you the wrong way.. Bam! Quickly pop off the magnetic carrot tip and in one fluid motion, your carrot becomes an action hero&#39;s secret weapon!&nbsp;This carrot is the answer to many of life&#39;s questions, and most importantly the one we ask ourselves each day, Why? Well… Why Not?&nbsp;It&#39;s a fricking carrot with a concealed katana in it. What more do you want??&nbsp;Anyways, I&#39;ll upload two profiles, one with the stem and one without. You&#39;ll probably just break the stem off anyways doing some crazy katana&#39;ing in your basement. Both carrots will require 4 - 3x6mm magnets to connect tip to body.&nbsp;For more collapsing weapons, check these out:Banana Saber: <a target="_blank" href="https://makerworld.com/en/models/118301" rel="nofollow noopener">https://makerworld.com/en/models/118301</a>The Pickle Sickle: <a target="_blank" href="https://makerworld.com/en/models/190877" rel="nofollow noopener">https://makerworld.com/en/models/190877</a> 7ft Bo Staff: <a target="_blank" href="https://makerworld.com/en/models/413159" rel="nofollow noopener">https://makerworld.com/en/models/413159</a> Sword on the Cob: <a target="_blank" href="https://makerworld.com/en/models/417307" rel="nofollow noopener">https://makerworld.com/en/models/417307</a> &nbsp;&nbsp;

The Karrotana - It's a Carrot shaped Katana!

Funny

Woven spring basket&nbsp;Decorative basket to place sweet eggs or other decorative pieces.&nbsp;Hope you like it.&nbsp;

Woven spring basket

Home

MingGY

之前上传的文件被错误地设置为启用支撑。我现在正在重新上传它。这是一个不需要支撑的模型，可以直接打印。The previously uploaded file was mistakenly set to enable supports. I am re-uploading it now. This is a model that does not require supports and can be printed directly<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/788589/2024-03-29_71cbe3e86e17d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/788589/2024-03-29_da6ec1859879d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/788589/2024-03-29_696912ce721c2.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/788589/2024-03-29_0cdeb6683cd9b.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/788589/2024-03-29_84dfdb9312b46.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/788589/2024-03-29_fa6752e4ccf67.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/788589/2024-03-29_7f9bf802469c2.jpg"></figure>

Two Woven baskets_3S-no support-两款编织的篮框-无需支撑 -3S

Gardening

Mc2.project3D

Con questo modello si fanno questi test:-overhang-tollerance-hole-bridge-walls-diameter-meausures-text<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/822284/2024-03-26_2977e6744d7b6.png"></figure>&nbsp;&nbsp;&nbsp;Test Overhang:-Una torre a sbalzo con gradazioni differente: 15°, 30°, 45°, 60° e 75°-Una torre a sbalzo con gradazioni differente: 10°, 20°, 30°, 40°, 50°, 60°, 70° e 80°&nbsp;Test Tollerance:-con sei differenti offset vediamo lo scorrimento fra materiali, la tolleranza è stata applicata al pezzo base quindi i 5 componenti sono tutti uguali fra loro.test 0.05mm, 0.10mm, 0.15mm, 0.20mm, 0.25mm e 0.30mm&nbsp;Test Bridge: (generatore pareti “Arachne”)-un test è basato sulla distanza che varia da 10mm a 50mm con misure intermedie di 20mm, 30mm e 40mm.-il secondo test è fatto per le singole linee a sbalzo. (vedi nella mia bacheca troverete la mia bellissima farfalla)&nbsp;Test Hole:-abbiamo diversi fori, sia rettangolari che cilindrici.partendo dal rettangolo 2x10mm a 3x12mm e 4x14mm, finendo dal cilindro da 2mm, 3mm, 4mm, 6mm e 8mm&nbsp;Test Diameter:-tutti con parete da 1mm abbiamo i cilindri da 4mm, 6mm, 8mm e 10mm&nbsp;Test Wall:-con 5 pareti differenti partendo dalla parete più esterna andando alla parete più interna, lo spessore delle pareti e di 1.00mm, 0.8mm, 0.6mm, 0.4mm e 0.2mm&nbsp;Test Meausure:-3 misure da10mm, 20mm e 30mm di X Y Z.&nbsp;Test Text:-con 5 diverse misure sia in estrusione positiva che negativa abbiamo le seguenti misure di test: 1.4mm, 1.6mm, 1.8mm, 2mm e 2.2mm&nbsp;Spero di esservi stato utile, date un&#39;occhiata alla mia bacheca troverete cose interessanti.&nbsp;Buona Test Stampa da MC2

Test Printe 

Test

Asdfgasdfg

Dryer rack that fits like a spool inside your Sunlu Filadryer S1 Plus/S2. Gaps are 1mm wide so your Silica Gel beads wont fall through.Works well with bags and loose beads.Depending on what material you print with you can crank up the temp, I wouldn't go higher than 50c with PLA due to vicat softening, however printing it in PA-CF and you can crank it up as high as the dryer will go. But whatever temp you usually dry that filament at would work, just takes longer the lower the temp. If your desiccant is really saturated you might want to leave a gap in the lid.Designed to be snap fitted together, but really no reason to pull it a part so might as well super glue the parts together.&nbsp;<h3>Update:</h3>I've uploaded a printing profile with each side on different plates so the model wont print over the calibration lines, as well as configure it for PLA, PA-CF, ASA and ABS

Sunlu Filadryer S1 Plus/S2 Dryer Rack

Sunlu Dryer S2

胖子天R

首先说一声抱歉，对前面下载文件打印，耽误大家时间说声对不起First of all, say sorry for the previous download file printing, say sorry for the delay in everyone's time由于做完模型，机子出现问题，没有打印验证就将模型上传，实在抱歉As the model is finished, there is a problem with the machine, and the model is uploaded without print verification. I am really sorry现在经过两个版本的更改，把切片文件进行了相应的修改，颜色分层有了最终的形态Now after two versions of the change, the slice file has been modified accordingly, and the color layer has the final shape从左到右依次是第一版到第三版From left to right are the first to the third editions<img src="https://makerworld.bblmw.com/makerworld/draft/392365/2024-01-12_b852451f9a9e.png">第三版在HF软件里的stl文件还是颜色有点问题，手动的将颜色层高改变了The third version of the stl file in the HF software is still a little color problem, and the color level is changed manually----------------------------------------------------------------------------------------------------------原始的高度：Original height:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu White Transmission Distance: 5!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Pure Yellow At layer #12 (1.04mm) swap to Red At layer #19 (1.6mm) swap to White for the rest. ---------------------------------------------------------------------------------------------更改后的高度：Changed height:Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Pure Yellow At layer #12 (1.04mm) swap to Red At layer #31 (1.6mm) swap to White for the rest.---------------------------------------------------------------------------------------也就是让红色多一些能够显示出更多的细节，当然你也可以自己修改颜色的层高得到更好的效果That is, let the red more to show more details, of course, you can also modify the height of the color to get a better effect很感谢大家对我的批评和指正，谢谢大家的支持，我会更严谨的使用软件制作出模型，并测试后分享出来，谢谢大家！Thank you very much for your criticism and correction, thank you for your support, I will use the software more rigorously to make a model, and test and share it, thank you!利用MJ生成的剪纸浮雕图像Using MJ generated decoupage relief image在hueforge软件中生成模型文件Generate model files in HueForge software&nbsp;

2024dragon-hueforge已修改

Hueforge

magnos

A plain and simple plate cleaner to clean the plate for any other prints that needs a clean bed. Recomended to print before any light boxes or something that needs a clean and nice surface. Works for all printers from bambu lab, except the A1 Mini.&nbsp;Happy Cleaning!

Bed Cleaner for X1C, P1S, P1P and A1

BambuLab A1

AU3D

This shelf features a straightforward design with simple supports. The corners are intentionally left unrounded, allowing you to mount multiple boards side by side for a seamless, continuous surface. The shelf comes in two widths (240mm and 160mm) and three depths (100mm, 80mm, and 60mm). To ensure optimal results, please ensure your build plate is thoroughly clean, as the sharp corners can lead to warping. Personally, I did not experience wraping with Basic PLA on my P1P though.<h3>More Sizes</h3><a target="_blank" href="https://makerworld.com/en/models/516526" rel="nofollow noopener">This set of shelves for DIY boards</a> offers additonal width, all fully compatible with the original Skadis boards.<h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my<ul><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/453266" rel="nofollow noopener">IKEA Skadis Shelves, Trays and Container Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">General IKEA Skadis Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/@AU3D/collections/1044616" rel="nofollow noopener">IKEA SKADIS Boards Collection</a></li></ul>