Fit perfectly, thx

Simple, easy, quick print.

Went with the destroyed look. Used PETG just because it will get a lot of window time. Resized to fit my insert. Perfect! Thx

Collection complete! Printed PETG with 0.2mm profile. Thanks

Fun print, used the default settings with the exception of increasing the top z distance and slightly scaled down for my fit. Printed in PETG bc I'll have it sitting on a windowsill

Printed with standard settings with the exception of top z distance as others have said. Printer PETG since it'll stay on a windowsill. For anyone planning 0.12, I originally thought of using 0.12 layer height but then would need to paint some extra supports at the bottom edges of the helmet bc the slicer didn't do it automatically. I printed one (no supports on those floating tips and no small brims) and I kept getting lifting edges (on my part mind you) due to a mix of air flow and lack of supports. can definitely be done with planning but the 0.2 looks great as is!

Smooth looking profile and print. Printed at 102% bc my frost was just a wee bit too tight from my printed Hive tiles, snug but difficult to remove. Possibly a shrinkage issue on my end not taken into factor in my own saved slicer settings. For my print 102% was nice!

Great profile. The 0.2mm nozzle really broke ggt out thrnfie detail. Stuck to classic B&W using my AMS for swap.

printed in PETG. used brim ears with all of those right angles and long sides. worked great!

Fun prints. fit perfectly. printed in PETG and used a very slight brim since PETG can be finicky with that first layer. danke!

just what I was looking for. top profile. thanks!