#Questions How do I tell Bambu Studio that I do not have an AMS? Somehow it is stuck asking me to pick an auxiliary filament. Thank you!

#PrintClinic Help! I've tried this print twice now - re-sliced it in between. Same thing. Puts down the first layer just fine, and then - it goes crazy and starts digging up the PLA it laid down. Please help. (I'm running bed leveling now, but just ran it the other day) This is not unstuck. It's been torn apart by the nozzle.

#PrintClinic This started to curl up off the build plate, and I added some masking tape to hold it down. I'm not asking about that. My question is about the texture of the first layer. I sliced this with default settings, and there are three different first layers here. The far left is the worst. It looks like just unstuck strings of filament. The middle section is a little better. The "strings" look at least fused somewhat. On the far right is the way it all should look. You can see I was using the textured PEI plate, and it shows here. What is happening? How do I fix it? (thanks in advance)

Keep getting an error in trying to upload a file to MW. I don't know what's wrong or how to fix it. " I just printed this myself. I sliced it according to defaults. So I even tried turning it into an stl and then back to 3mf. Same thing. Anyone have any ideas?(Edited)